Does anyone have any tips that they can give me before the install this saturday. I know some of you have learned a few things you would do differently the second time.

DAVE_FL
97GS
HRC stageI (installed June 16th!!!)

Have everything ready, so your not making unneeded trips to the parts stores. Buy some oil, and band-aid Most importantly keep cold refreshments on hand and the # to the local pizza joint by the phone! Be patient cuz your gonna cuss up a storm but, have fun with it...its great experience! later.

STAR Turbo stage II
180whp @ 5psi(untuned)

Is a oil sender unit socket needed...can i get one at the local auto parts store?

DAVE_FL
97GS
HRC stageI (installed June 16th!!!)

It makes it alot easier to take off with, but im sure you can persuade it with something else. I got one from Autozone.

STAR Turbo stage II
180whp @ 5psi(untuned)

Well I dont know the difference between a 1 1/16" deep socket and an oil sender removal socket but they must be damn simular cause the deep socket worked great for me. Got it at the local pepboys. If MWC is helping it should go smoothly (as you know he has a few installs under the belt).


Stan2gnt
Stan2va@aol.com
95 Talon 420A-Turbo
Former and future nitrous user

:farfrommugen:
Yes I still own a 2gnt.
Damn right I've been here longer than U
klassic_liven@yahoo.com

Don't expect to get it done in one day. Be prepaired to finish it the next day. Don't rush anything. But if MWC is helping...I'm sure you will get it done in one da



Ball Bearing Star Stage II
"Power is nothing without control"

I use to have a White 99 GS Sport with a Star Stage II Ball Bearing T3/T4 turbo...it was fun untill....well those who remember me know Oh Ya...this is what I have now... a 99' GSX...

Yeah I plan on learning a few things from MWC. He really knows what he is doing. I am lucky to have him helping me out! BTW I got a sending unit socket. It looks a bit different than a normal socket.

DAVE_FL
97GS
HRC stageI (installed June 16th!!!)

Haha make sure you get the right length man. I bought a short one and then realized I need a gigantic size one that was like 5 inches (sounds nasty doesn't it ) . Got it Kragen also. Hmm make sure you have a place to put all your tools, you'll be guessing a lot. hardest part will probably be the exhuast manifold also, at least that was what took me so long. Haha it took me like 4 days of work on and off to finish mine too. Make sure you have your car in a safe spot, like in a garage also. Be patient too. haha I like that one about bandaids! It's true man I tore my hands up and cut a chunk of meat off of my hand when I cut it on a hose clamp.


95 Mitsu Eclipse RS
AFX Pulley | Performance Muffler | HKS Air Filter | KYB AGX Shox | Skunk2 Coilovers | FU, RU, RL, and RRE FL Tie/Strut Bars | RS to TSi Rear Disc Mod | RS to TSi upgraded F&R Sway Bar | 97' Spyder Eclipse 5 Spoke Wheels | Star Stage 1 T3/T04E BB Turbo Kit | and 1 HiGhLy SkIlLeD DrIvEr! |

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?

LAST EDITED ON 13-Jun-01 AT 04:22 AM (PST)

If you haven't already gotten it, you will need teflon for the different fittings, and NOT the tape stuff you would use for home plumbing... you have to get the paste made for this type of stuff.

While you down there you may want to replace your belts if it has been a while since you last did this.

Make sure you have new spark plugs that are 1 heat range colder than stock (for NGK you will need BKR7E-11 gapped to .035", stock number 1283).

Make sure you have about a 1/4 tank of gas before the install if you are replacing the intank fuel pump. Not necessary, just helps to keep the gas where it belongs...

Hope this helps a little.

DoN
'99 GS Sports Edition
Star Stage 2, CFDF Clutch
Greddy Manual Boost Controller
Greddy BOV and EVO Exhaust
Greddy TT and shift knob
AF/X Underdrive Pulley
AEM Big Brake Kit
B&M Edge Short Shifter
Eibach Sportlines with Tokiko Blues

'99 Eclipse GS Sports Edition
Star Stage 2
Greddy EVO Exhuast
AEM Big Brakes
Greddy Type S BOV
Pioneer DEH-P7200
Bazooka EL1500 running 2 MTX 10" Subs
Fosgate Separates throughout

They make tape for autmotive use too. Its a little different from the plumper grade but what I used (dad happens to be a HVAC repair man so I had it all there).


Stan2gnt
Stan2va@aol.com
95 Talon 420A-Turbo
Former and future nitrous user

:farfrommugen:
Yes I still own a 2gnt.
Damn right I've been here longer than U
klassic_liven@yahoo.com

J/K bro, so far what everyone here has said are great suggestions. I can tell you that I have all that has been mentioned thus far. Even the "socket" so if you want to return that for a few bucks go a head. I have the paste and bandaids as well. I am sure 411 will have the # to the local Pizza place.
SEE.....(oh wait) I meen later!









http://smkn95eclipsemwc.homestead.com/mainpage.html

LAST EDITED ON 13-Jun-01 AT 01:49 PM (PST)

LOL...So you have some extra ngk's too right? And food wont be a problem. SEE YA!!!!!!!!!! (formaly used by MWC, it goes where ever the turbo kit goes)LOL

DAVE_FL
97GS
HRC stageI (installed June 16th!!!)