#61168, "CEL Code 61 BARO Pressure Out Of Range." Nov-22-03 01:30 PM by 97TurboGS
Anyone have any idea what that means? Got that after installing the S-AFC II. I searched for this on the forum and found 1 thread regarding it. But it seems that the question wasn't really answered.
-------------------------------
Auto response from nuspecracing (5:04:16 PM): dnoatnig palmsa so laeve me a megasse, i'll be bcak soon...
#61170, "RE: CEL Code 61 BARO Pressure Out Of Range." In response to Reply # 0
welcome to the club. CEL 61 is standard issue with the SAFC. Some get it, some don't! and no one who has an SAFC has figured out a way to get around it if they get it that works for eveeryone!!!
Enjoy your new code!
USED TO HAVE...Everything you wish you had, and then some...
You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)
#61191, "RE: CEL Code 61 BARO Pressure Out Of Range." In response to Reply # 2
actually you should be able to fix it by adjusting the in/out numbers using this formula
Get a vacuum gauge and hook it up to the manifold vacuum port behind the throttle body. Car warm, in park, you should get a reading of about 18 inches of vacuum/400mm or so look at the pressure setting on your AFC take that number ... say it reads like 464 mm look at the vacuum gauge ... like 18.2 inches here's the formula inches * 25.4 = mm so you take 18.2 * 25.4 = 462.28 you'd be almost perfect! try it at 5 then 7 and see the difference
Search
Printer-friendly copy
2 Users in Chat
