| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | CEL Code 61 BARO Pressure Out Of Range. |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=61168 |
61168, CEL Code 61 BARO Pressure Out Of Range.
Posted by 97TurboGS, Nov-22-03 01:30 PM
Anyone have any idea what that means? Got that after installing the S-AFC II. I searched for this on the forum and found 1 thread regarding it. But it seems that the question wasn't really answered.
|
61170, RE: CEL Code 61 BARO Pressure Out Of Range.
Posted by tim97rs, Nov-22-03 01:53 PM
welcome to the club. CEL 61 is standard issue with the SAFC. Some get it, some don't! and no one who has an SAFC has figured out a way to get around it if they get it that works for eveeryone!!!
Enjoy your new code!!:)
|
61188, RE: CEL Code 61 BARO Pressure Out Of Range.
Posted by 97TurboGS, Nov-22-03 07:26 PM
Great...... I love CEL's.
|
61191, RE: CEL Code 61 BARO Pressure Out Of Range.
Posted by mcgyvr, Nov-23-03 02:08 AM
actually you should be able to fix it by adjusting the in/out numbers using this formula
Get a vacuum gauge and hook it up to the manifold vacuum port behind the throttle body.
Car warm, in park, you should get a reading of about 18 inches of vacuum/400mm or so
look at the pressure setting on your AFC
take that number ... say it reads like 464 mm
look at the vacuum gauge ... like 18.2 inches
here's the formula
inches * 25.4 = mm
so you take 18.2 * 25.4 = 462.28
you'd be almost perfect!
try it at 5 then 7 and see the difference
|
61200, RE: CEL Code 61 BARO Pressure Out Of Range.
Posted by 97TurboGS, Nov-23-03 07:32 AM
On our cars we select the Pressure option on Sensor Type right?
When i change the Sensor in/out should i just reset the ECU and see if that CEL goes off?
|