hey guys, i'm installing a safc on a 97 eclipse rs. i have the factory service manual and have everything but the rpm wire hooked up. I have searched your threads for two days and have resorted to asking you a question that has probably been answered too many times. I have a dyno appointment on monday so i really need your help to get this thing going! you have links to the install but they are down. also i have searched the manual for info and it seems to be non existant. I have ran harness to ecu and would like to hook up rpm lead there. I guess the last resort would be to run wire back inside to the insturment cluster but that seems kind of ghetto. any help would be greatly appreciated.. tom
#59977, "RE: safc II install Q's" In response to Reply # 1
No i think its the Solid white wire on the bottom of the harness. If you unplug your ecu and remove it from the car is really easy to get to the wire and tap in.
____________________________________________________ four nails four corners four riders and four horses
#59978, "RE: safc II install Q's" In response to Reply # 2
white wire is tach, white/green is for interior lighting.
USED TO HAVE...Everything you wish you had, and then some...
You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)
#60017, "RE: safc II install Q's" In response to Reply # 4
Only one white wire, if you look at it extensively though, you will probably see very light pink dashes on it, at least on mine, and that is the one.
______________________________________________________________ 1999 Civic SI, Boosted and built, 12.67@112.
Gone but not forgotten..... 1998 Eagle Talon ESI, built and boosted 14.2@98 1992 Eagle Talon TSI AWD12.91@104 1992 Honda Hatch swapped and sprayed14.0@108
Search
Printer-friendly copy
0 Users in Chat
