Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 2 Users in Chat
Top 2GNT Technical Turbo/Nitrous Tech topic #57050
View in linear mode

Subject: "Home brew higher octane" Previous topic | Next topic
JustOneSep-26-03 07:40 PM
Old School 2GNTer
1278 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57050, "Home brew higher octane"


          

I was just curious who here has tried the Toulene/Xylene mix trick to up the pump octane?

What % did you mix and what were your observations on how the car ran?

I have two gallons of Xylene in the car right now but I am not going to be running it until tomorrow. Im going to be running about a 2:1 ratio

To all those who are going to say why not just use race gas? I also think I would prefer 100 or 104 out of the pump but I just wanted to experiment and see for myself.

shooting for ~23-24psi

I will post my results

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic
RE: Home brew higher octane, 420AYE, Sep-26-03 08:03 PM, #1
RE: Home brew higher octane, 420AYE, Sep-26-03 08:03 PM, #2
RE: Home brew higher octane, Chamuko, Sep-26-03 08:11 PM, #3
      RE: Home brew higher octane, thedawg, Sep-26-03 09:02 PM, #4
      RE: Home brew higher octane, RyaN95i4, Sep-26-03 10:56 PM, #5
RE: Home brew higher octane, RyaN95i4, Sep-26-03 10:53 PM, #6
RE: Home brew higher octane, JustOne, Sep-27-03 06:14 AM, #7
      RE: Home brew higher octane, Diceman19, Sep-27-03 06:48 AM, #8
           RE: Home brew higher octane, Dave_FL, Sep-27-03 07:17 AM, #9
                RE: Home brew higher octane, JustOne, Sep-27-03 08:27 AM, #10
                     RE: Home brew higher octane, JustOne, Sep-27-03 09:43 AM, #11
                          RE: Home brew higher octane, MotoFool, Sep-27-03 10:26 AM, #12
                               RE: Home brew higher octane, thedawg, Sep-27-03 08:08 PM, #13
                                    RE: Home brew higher octane, KSeclipse, Sep-27-03 08:12 PM, #14

420AYESep-26-03 08:03 PM
Donating 2GNT member
2850 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57051, "RE: Home brew higher octane"
In response to Reply # 0


          

how much is it?

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

420AYESep-26-03 08:03 PM
Donating 2GNT member
2850 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57052, "RE: Home brew higher octane"
In response to Reply # 0
Sep-26-03 08:03 PM by 420AYE

          

how much is it?


oopsie..double.

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
ChamukoSep-26-03 08:11 PM
Donating 2GNT member
3668 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57053, "RE: Home brew higher octane"
In response to Reply # 2




          

interesting enough I was reading into this tonight.

why not use toulene? it has an octane rating of 114 R+M/2.

I havent read all that much about xylene so care to share on that?

toulene ranges from 5 bucks a gallon to 2.55.

My bro has a 30% discount at the paint store so this can mean nice things for me.


borrowed from the links below.

(gallons of gas * octane)+(gallons of toulene * 114)
______________________________________________________
total gallons.

http://www.elektro.com/~audi/audi/toluene/
http://www.idavette.net/hib/fuel/

interesting how they say that the gas in california is "more powrfull" but we still only get 91 octane emoji to them.

Member # 751


FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
thedawgSep-26-03 09:02 PM
Donating 2GNT member
6287 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57055, "RE: Home brew higher octane"
In response to Reply # 3


          

I mix toluene 3:1 with about a cup of marvel magic oil poured in.

I did have an injector get gummed up, but I don't know if that's related.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
RyaN95i4Sep-26-03 10:56 PM
Old School 2GNTer
2152 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57059, "RE: Home brew higher octane"
In response to Reply # 3




          

>
>why not use toulene? it has an octane rating of 114 R+M/2.
>


xylene has an octane rating of 117, and cost around the same or less than toluene

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

RyaN95i4Sep-26-03 10:53 PM
Old School 2GNTer
2152 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57058, "RE: Home brew higher octane"
In response to Reply # 0
Sep-26-03 10:57 PM by RyaN95i4



          

Ive run xylene mixes.

You should add small amounts of mineral spirits and tranny fluid to the mix as well. For every gallon of "home-brew race gas," run 100oz of toulene/xyxlen, 25oz mineral spirits, and 3oz of tranny fluid

the mineral spirts act as a cleaning agent, and the tranny fluid as a lubricant. this is similar to whats found in pump gas, and helps keep fuel lines from corroding and injectors from gumming up.

i ran 20% and 30% mixes, never more than 30% as Ive read mixed feelings about the how safe toulene/xyxlene are to run the clsoer you get to its "pure" form.


fwiw tho, the old turbo F1 cars use to run a mix that was ~85% toulene (the last ~15% being n-heptane, which has an octane rating of 0 - this helped F1 teams meet the rules limiteing race gas in the series, which dictated the RON octane rating, and not the MON or R+M/2 ratings). These were the F1 motors that would run ~50-60psi on 1.5L motors cranking out nearly 1000hp


btw, http://www.vtr.org/maintain/gasoline-octane.html has several different home-brews.

most arent worth the bother unless you can get a good deal or dont have high-octane fuel available locally

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
JustOneSep-27-03 06:14 AM
Old School 2GNTer
1278 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57066, "RE: Home brew higher octane"
In response to Reply # 6
Sep-27-03 06:15 AM by JustOne

          

I just put 20oz of MMO in, 10oz per each gallon of Xylene. I read through all the threads on it and it seemed people have had good results w/ it.

The reason for the Xylene over Toulene is because it isn’t on the federal watch list for chems used in meth production like Toulene is.

Also it has a higher octane. The highest octane I can get out of the pump is 91 where I live. So using a 2:1 ratio that makes my fuel octane come out to ~99.6

All in all it comes out to about 3 dollars less to run Xylene instead of just race gas. Not really worth it to me at this point but like I said I just want to try it out for myself.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
Diceman19Sep-27-03 06:48 AM
Donating 2GNT member
4629 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57067, "RE: Home brew higher octane"
In response to Reply # 7


          

my work has toulene and i asked my boss (who is related to me) if i could get some to sell to the guys on my board. he got all weird and was like what do they want it for. i told them race gas. he was relieved. ha ha. anyways. he said that toulene isnt the best additive because it makes engines run really hot. i dont know if you are compensating for that in the mixtures because i dont know crap about mixing gas and chemicals but i just thought i would throw what i know into the loop.

___________________________________________

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
Dave_FLSep-27-03 07:17 AM
Old School 2GNTer
3317 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57068, "RE: Home brew higher octane"
In response to Reply # 8




          

I can get 100 octane (unleaded)and 110 octane (leaded)about 3 miles from my house out of a pump. They are both $3.99 a gallon. Another great reason to have a fast car in florida.

Dave
05 Ford F150 SuperCrew FX4

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
JustOneSep-27-03 08:27 AM
Old School 2GNTer
1278 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57071, "RE: Home brew higher octane"
In response to Reply # 9


          

>I can get 100 octane (unleaded)and 110
>octane (leaded)about 3 miles from my
>house out of a pump. They are both $3.99
>a gallon. Another great reason to have a
>fast car in florida.



Must be nice, I have to go about 15min away to get 100 for like 4.xx but I only have to go about 5min away to get 110 (leaded) for about 4.xx. I usually get about 6 gallons 110 and 10 gallons 91. Give me about a full tank of 98 octane.

But anyway, I drove it around on 24psi w/ zero knock (audible) timing all looked and felt good. The car actually pulls smoother through the rpm band. So my verdict is that it works.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                    
JustOneSep-27-03 09:43 AM
Old School 2GNTer
1278 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57076, "RE: Home brew higher octane"
In response to Reply # 10


          

>I did have an injector get gummed up,
>but I don't know if that's related.

I dont think that it would have from the Xylene. It would clean it out if anything.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                        
MotoFoolSep-27-03 10:26 AM
Member since Sep 08th 2002
2103 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57080, "RE: Home brew higher octane"
In response to Reply # 11


          

on the injector thing it could have lceaned his fuel tank and lines and there for gummed his injector up from debreee...

Bill

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                            
thedawgSep-27-03 08:08 PM
Donating 2GNT member
6287 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57120, "RE: Home brew higher octane"
In response to Reply # 12


          

Bill, I strongly suspect that was the case... it cleaned the fuel system so well that old crap got dislodged from the lines or tank somewhere. Anyways, the injector was totally jammed, it wouldn't even click when activated. There was obvious orange crud in the tip. (See far left one - cyl #4)



My fuel filter was about 45k miles old, so I wasn't getting much filtration, if anything at all.

In my opinion, its perfectly fine to run toluene/xylene as long as you have a fairly clean fuel filter and maybe take out the injectors to clean them if you feel any weirdness.

BTW we're not supposed to use leaded gasoline because it fouls the O2 sensor badly.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                
KSeclipseSep-27-03 08:12 PM
Member since Oct 27th 2002
899 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57121, "RE: Home brew higher octane"
In response to Reply # 13


          

i run 2 gallons of toulene to every 10 gallons of gas and have excellent results with it


Nos Fogger Kit,AemCAI, TopFuel UDP, pacesetter cat-back, ARD bored 57mm t.b., P&P intake mani, Ractive front/rear strut bars,rear tie bar,eibach sportlines,tokico blues, morosso wires, ngkIX plugs, konig subzeros,proj. heads,gunmetal tails, rev.indiglow gauges,reverse light mod

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Turbo/Nitrous Tech topic #57050 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.066 seconds, executing 42 queries.