Hey guys Things are Crazy arond here but i got a couple hours to spend on my car the past couple days...

i remove a/c toatly condensor canister and pump assembly...

removed all the p/s stuff and rerouted the lines back together..

here is a low down on the motor
weisco 8.5:1
eagle h beams

pistons ceramic and moly coated..
clevite bearing moly coated..
fully balanced motor to within half a gram..

the bottom end (bedplate) has over 10hrs of constant deburing and polishing before the oil shed paint on it..

arp head studs, ported head, UDP, all ready for the 57trim t04e after shes broke in a bit....

here are the pics

Http://www.gottude.com/car/sept15

mothers polish is the shiznit look at my cam gears =))))

Bill

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

Sweet man. Hope it all turns out great. What does it cost for ceramic coating?

"Shop smart, shop S-Mart!" ~ Ash
Member # 1523

Bill when do you think you will have that baby up and running. Would love to see ya at one of the auto X events. We have one comming up in october for 2 day's.

Kevin
The old:


The new:

man, that is soo sweet. I hope this beast will be up and running soon so you can get some numbers.

winter project: custom t3/t4 turbo and some others

swe3t man! Get it running already

__________________________________________
~Chris
03 SRT-4

looks great. want to do mine for a penny? where did you get that chromoly and ceramic dun?

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

Ha! you're just jealous because I'm telling the truth.

Thanks for posting the pictures motofool. Now everyone gets to see the quality craftmanship you put into each and every engine you build.

Mototool - The other white meat!

"He might just be more badass than Dino." -DR1665

what is with your name and sig ^^^??


i have the ceramic and MOLY not chromoly =)
coatings done here locally
100$ for pistons, tops skirts and wrist pins
75$ for rod and main bearings...

Bill
on time frame 3 weeks i just got my tracking number for the rest of the parts so i can start putting it together....

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

>i have the ceramic and MOLY not chromoly =)
>coatings done here locally
>100$ for pistons, tops skirts and wrist pins
>75$ for rod and main bearings...

Geez you advertise for free like it's going out of style.

Hey guys I sell boxes of parts, too! - you can buy my mystery box for only $50! It includes at least 5 pounds of metal, whether it be pot metal or pieces of aluminum that I used when I tried to learn how to tig weld with. I still can't tig weld though.

I'm sorry you missed my other reply to this post

Mototool - The other white meat!

"He might just be more badass than Dino." -DR1665

> where did you get that chromoly and ceramic dun?

chromoly?

he didn't go anywhere to get it done, it took him 12 minutes to spray it on.

Mototool - The other white meat!

"He might just be more badass than Dino." -DR1665

u dont spray on chromoly its a material a derivitve of steel in fact like chromoly 4130...

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

>u dont spray on chromoly its a material a derivitve of steel
>in fact like chromoly 4130...
>
>

so is it "MOLY" or chromoly? - not wonder this guy is confused. you keep changing the name of it.

Mototool - The other white meat!

"He might just be more badass than Dino." -DR1665

moly is the coating u put on pistons it reduces friction and provides a coating that has to be worn through before it can actually wear on the piston so it lasts much longer...

a chevy v8 with moly side skirts wristpin and bearings provided a 15% gain in lost power by friction at 750rpms... image what it does at 7500rpms...

moly is also what u use for lubrication when assembling a motor on bearings n such,

chromoly is a metal and has nothing to do with moly coatings and it cant be painted it it must be cooked on in an oven at 400*

Bill

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

>moly is the coating u put on pistons it reduces friction and
>provides a coating that has to be worn through before it can
>actually wear on the piston so it lasts much longer...

yeah and when you spray it on you have a nice uneven and thick coating because a rattle can doesn't have the modulation a real application gun does.

>image what it does at 7500rpms...

probably nothing.

>moly is also what u use for lubrication when assembling a
>motor on bearings n such,

Is it? I've never put an engine together.

>chromoly is a metal

Is it? I don't know anything about chormoly or any of it's applications either *cough*rollcagebutyouretooslowtoneedone*cough*

> and has nothing to do with moly coatings and it cant be painted it
> it must be cooked on in an oven at 400*

which is why you don't use it, right? So all your coating are applied with $5 guns, and they're $5 for materials, but somehow you charge $100 for them?

Mototool - The other white meat!

"He might just be more badass than Dino." -DR1665

I deleted the first nasty response and hoped that would be all I'd have to do. If you want to criticize Motofool, at least sign in with your real name instead of making up a pseudonym. I'm locking this now...

Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire