just wondering. i posted it here b/c it's more turbo related. the 95's just seems so much more accepting to turbo related mods.

- Dan

HRC Stage 2|30lb injectors|S-FMU|Walbro255HP|AFX UDP|B&M Short Shifter w/ Symborski Shift Kit|Rear Strut Bar|Power Slot Rotors|more...

You'd have to get the '95 engine wiring harnass, at least. There may be other slight wiring differences.



15.9 @ 86.7mph

Smooth idle? We don't need no stinking smooth idle.

Mods List:
http://highlander.dsmpower.com/sig.htm

I think that it would be possible to get away with just using the PCM connector from the '95 harness, as all of the wiring colours are the same from all years (at the ECU, anyways), or they are all close. In other words, each wire on a '95 corresponds to a wire on a '97, or so I was told...
-=B-=

Dude, Boeing called. They want their wing back.

Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate.
Me: Can I put that in my sig?
Dark0ne95: GO right fucking ahead.

i didn't realize the harnesses were actually different.. thanks though

- Dan

HRC Stage 2|30lb injectors|S-FMU|Walbro255HP|AFX UDP|B&M Short Shifter w/ Symborski Shift Kit|Rear Strut Bar|Power Slot Rotors|more...

i dont mean to steal the thread here, but you said that the 95 ecu's are more turbo accepting?...i also heard that 95's dont need the missing link (only running 5psi), is that true?... i have a 95 and was just wondering if i need the missing link...thanks
and yea, the harness is completly different....
doug

No you don't need to use the ML, however the boost might eventually hurt the map sensor. (esp if you go high boost like 10+) So it's still not a bad idea to get one as the PSI goes up, but I ran 8psi for over a year without one.

I edited to the wiki!

I've run 15psi and up for a year or more.. no issues.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

The MAP sensor is designed to withstand intake backfires of a few hundred PSI. No worries on the MAP sensor dying on ya.
-=B-=

Dude, Boeing called. They want their wing back.

Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate.
Me: Can I put that in my sig?
Dark0ne95: GO right fucking ahead.

and you guys all have 95's.....sweet!!, thats always good news
thanks

What you are trying to do is convert from obd1 to obd2. You will need at least a 95 ECU and 95 wiring harness from the ECU.

Karl
97 GS
04 BMW 330i ZHP