Well i just did mine today, and damn, at WOT, 13 psi, in 4th gear, at the top of 4th @ 6500 rpms, it showed 150 degrees! Normal cruising around 65 or so in 5th, showed the lowest reading of 116 degrees. Outside temps was in the mid/upper 70's. Looks like this 1G side mount IC isnt cutting it at 13 psi :o I figured that though..not a whole lot of surface area to cool. I would think if i can lower the temps under boost to even 125 degrees, that i could gain what, maybe 10 HP?? What do you guys get for intake temps? I really need a FMIC baddddd...

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

dude lets install a FMIC!

______________________________
Matt D.
'06 Evo IX SE
'98 RS-T 13.8 @ 106.1

>dude lets install a FMIC!

AND sell ME the piping for the smic


-------jezreel

anyone? I'm really curious to see what IAT's are for your FMIC's and running 10+ psi boost..

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

mine are 125-130 degrees F at full boost, but im only running 8psi.

edit: using pocketlogger, & i have the star fmic.

-Joe
___________________________________
White 98 Eclipse GS MT
Star Stage 2
*Stolen - 10/24/03*

next time im in town matt we can datalog mine. you might have to check pocketloggers site for the updated software though. we were having issues last time with the a/t remember?

______________________________
Matt D.
'06 Evo IX SE
'98 RS-T 13.8 @ 106.1

>next time im in town matt we can datalog mine. you might
>have to check pocketloggers site for the updated software
>though. we were having issues last time with the a/t
>remember?

Yeah i was thinking about that too..since you have the nice FMIC I'm not sure how useful that info would be though, cause i will prob never be able to afford that HRC FMIC haha...maybe someday

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Just wondering but what do you get under idle on a cold night like a minute after you start your car? I datalogged my car last night and it was 91 degrees! I was like shiet that kinda high for just starting it up and it cold outside. I think some kinda hood scoop or vent would greatly help IAT because I think what's really heating it up is the ambient engine bay heat the most. lets face it our cars have poor air circulation in the engine bay.

maybe if you make a coldair intake for your turbo it'll help a bit too. Probably not as much as an IC though.

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?

Yeah a few months ago when I was loggin it was about 115 at idle and 140-150 at WOT. Thats when I wanted to turn the little 'power hump' on the hood into some kinda scoop to pull in cold air. If I cut acrost the hump at the front and poped it down, then put some kind mesh over the hole. Then design a sheild that would go around the air filter and keep the hot air away. everyone told me it was a bad idea so i went to my room and cryed my eyes out.

I even tried to pay my buddys dad that owns a body shop to do it and he said no its a bad idea bla bla. ogh well..

____________________________________________________
four nails four corners four riders and four horses

I'm doing the hood scoop thing right now. I picked up a junk hood to build a prototype. I cut a panel out of the front of the hump. Then built a hinge for the panel. When the panel is closed, it looks like a stock hood. When you want, the panel will flip open and direct air down to my airbox. I'm using a tiny linear solenoid to open the panel. I've built a control circuit to power up the solenoid when a preset boost (or vacuum) level is reached. So, when cruising around town...its essentially a stock hood. When you get on the gas, the panel flips open and sends ambient air down to the intake. I'll post pics when I finish the prototype.

Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire

i have the 1G SMIC too and i have similar a similar IAT's. i would have to agree that the 1G SMIC isn't much good past 14 psi or so with the S16G. this morning i hit 1600 degrees on the EGT gauge at 15 psi in 5th gear after about 4 seconds of full boost. oxygen sensor voltages were about .96 or so, outside tempature about 80-85.

2016 WRX STi Limited (current)
2001 A4 1.8tqms (donated)
1991 GVR4 #1933 (sold)
old.dsmregistry.com/detail.php?carid=218 (dismantled)

How much do you think the invader hood would really help with ambient air temp in the engine bay? I can't imagine it making *too* much of a difference, since no air is really being "forced" into it, but I would think that it helps some. One more place for hot air to come out and cold air to go in...

amiller99rs: seriously, chicks suck sometimes
amiller99rs: like if a girl walked by and said "Hey, nice cock" and just kept going you'd smile all day about that

run4cvr either needs to make a run or lend me his pocket logger. I'll find out for ya

__________________________________________
~Chris
03 SRT-4

Yeah, 150 degrees IAT really says that the 1g SMIC is getting fully heat soaked. I would have to think that its only truely efficient for around 8-9 psi of boost on the S16G. The compressed air on the S16G really starts to heat up once you go over 13-15 psi, because its efficiency starts to go down after around 15 psi. For those who want to do the hood thing, be very careful about getting water into the intake path. Corbin's idea sounds great, this way you can close it off if it starts raining and whatnot.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

i like Corbins idea. Corbin when you get that working let us know.. i might do that.. try to keep track of all the parts etc we need.
cool
Michael
99gs
HRC Stage IV 8-Injector Setup
2GNT Member #32

Corbin is the man, thats all I have to say.