my nitrous works kit will be ariving early this week. i was wondering if anybody out there can tell me where to go for any directions for this kit. i know installing the kit wont be too difficult but if there is any official "nitrous works" info out there, id really appreciate it.
I used to have the Nitrous Works system. It works great and is very easy to install. Will take you about 2-3 hours to install. Excellent results from the kit also. Don't over jet it though. Stay at 75 horse unless you want busted ring lands.
thanks for the reply man, yeah i dont plan on going beyond a 75. sometimes i get a shocking reaction just for considering a 75 in the first place. what times did you run with the nitrous works systems with what size jets? and what other modifications did you have?
a 75 is EASILY attainable for a stock 420A, although to get the most of it, free up the intake and exhaust (I ran an open header ). Some have bumped it up to a 100 shot with some success, but I wouldn't risk it. TIP: What I did for my kit was jet it for an 80hp shot, but put one size too big of a fuel jet in just to be safe. The car ran like a champ.
i don't know that much about Nitrous Works but their factory is here in my town. Barry Grant(big domestic distributor for carbs and stuff) makes it. A friend of mine works their and he says they have a really insane quality control process. btw im in Dahlonega, GA. good luck and im about to be sparying as soon as i can find a damn fitting
the fitting that you put the jets in. The thing that screws into the shark nozzle and connects the hose to it. i think its a -3X1/8 npt straight fitting. know where i can get it?
Search
Printer-friendly copy
5 Users in Chat
). Some have bumped it up to a 100 shot with some success, but I wouldn't risk it. TIP: What I did for my kit was jet it for an 80hp shot, but put one size too big of a fuel jet in just to be safe. The car ran like a champ.