my nitrous works kit will be ariving early this week. i was wondering if anybody out there can tell me where to go for any directions for this kit. i know installing the kit wont be too difficult but if there is any official "nitrous works" info out there, id really appreciate it.

also, what were your results with this system?

tia

bizump to the izump. or something.

I used to have the Nitrous Works system. It works great and is very easy to install. Will take you about 2-3 hours to install. Excellent results from the kit also. Don't over jet it though. Stay at 75 horse unless you want busted ring lands.

thanks for the reply man, yeah i dont plan on going beyond a 75. sometimes i get a shocking reaction just for considering a 75 in the first place. what times did you run with the nitrous works systems with what size jets? and what other modifications did you have?

Well I was running 14.6. That was in an Avenger though. I had intake,header,55mm throttle body, under drive pulley.

I get the same thing about wanting to run a 75 shot. Every honda owner says it will be too much and im like thats not what the guys on 2gnt say:thumbsup

a 75 is EASILY attainable for a stock 420A, although to get the most of it, free up the intake and exhaust (I ran an open header :)). Some have bumped it up to a 100 shot with some success, but I wouldn't risk it. TIP: What I did for my kit was jet it for an 80hp shot, but put one size too big of a fuel jet in just to be safe. The car ran like a champ.

i don't know that much about Nitrous Works but their factory is here in my town. Barry Grant(big domestic distributor for carbs and stuff) makes it. A friend of mine works their and he says they have a really insane quality control process. btw im in Dahlonega, GA. good luck and im about to be sparying as soon as i can find a damn fitting

^^ what fitting?

the fitting that you put the jets in. The thing that screws into the shark nozzle and connects the hose to it. i think its a -3X1/8 npt straight fitting. know where i can get it?