#51250, "Would this work for a setup" Jun-30-03 09:55 AM by likestofloorit
NGK BRK7E-11 Plugs - NGK-1283 (Paid 7.96 @ summitracing.com) Autometer Phantom A/F Gauge ATM-5775 (Paid $30) Autometer Phantom Oil Pressure Gauge ATM-5757 (Paid $49) Autometer Phantom Transmission Temperature Gauge ATM-5727 (Paid $49) Autometer Phantom EGT Gauge 5744 (paid $136 @ summit) Autometer Phantom Boost Gauge ATM-5703 ($47 @ summit) Autometer Phantom Electric Fuel Pressure Gauge ($189 @ summit) 16g turbo/oil kit 16 Manifold Hahn 16g Hahn downpipe with the diffrent GST bolts Vortech S-FMU w/ all disks & springs (Paid $210 shipped) Missing Link (paid $55 shipped @ group5motorsport.com) Greddy type S BOV Manual Boost Controller - ball & spring (Paid $18 shipped @ eBay.com) Walbro 255 fuel pump the one off ebay for 100 big ones Intercooler when i raise to 7 psi later..on
Hey i used some parts of another list that was posted but i wanted to go with the 16g and Hahn is the only person i know to get a premade downpipe and the exhuast manifold from...if i start ordering this stuff will i be able to get it going..or am i missing somting thx...
Or do you think it would be better to get a t3/t4??? and if you do where do i get the exhuast mani for it and crap...
97 Rs 5sp -Intake -Front upper strut bar -Tint 20% o yeah -Coilovers/KYB ADJ -60mm TB -P&P intake mani -Cat Back System. -Funny Rims?? dont lie ~likestofloorit.. (1/4=16.258)(60=2.363)
#51257, "RE: Would this work for a setup" In response to Reply # 0
i know bill makes exhaust manifolds for all different types of turbos. The website is www.gottude.com and you will also need oil and fuel lines as well. Other than that, thats about what i have on my list for my custom setup except i'm getting a t3/t4. I think it's more personal preference. Oh, and you need piping, but thats kind of obvious. Good luck with your kit man.
winter project: custom t3/t4 turbo and some others
#51258, "RE: Would this work for a setup" In response to Reply # 1
I thought you could use the stock fuel lines..or i have to replace all of them...And for the oil lines for the turbo do they have a kit on gottude cause i thought i saw one but the site is not working for me..? thx good luck on your kit to
97 Rs 5sp -Intake -Front upper strut bar -Tint 20% o yeah -Coilovers/KYB ADJ -60mm TB -P&P intake mani -Cat Back System. -Funny Rims?? dont lie ~likestofloorit.. (1/4=16.258)(60=2.363)
#51260, "RE: Would this work for a setup" In response to Reply # 2
with a 97, i read that you need to run a fuel line back to your gas tank. And gottude isn't working for me either right now, but send motofool a pm, thats the man to talk to. Good luck
winter project: custom t3/t4 turbo and some others
#51295, "RE: Would this work for a setup" In response to Reply # 5
yes it is. You're not missing much, it's all just the small stuff. All I have done is searched through the turbo section for "custom" and have read maximum boost. I have made a list of everything i need and am slowly but surely getting through it. I'll hopefully be boosted in 5-6 weeks. Just take some time when making a custom kit and don't rush yourself into doing it. It will also feel more satisfying to you when you are boosting and built the kit from scratch. Anyways, good luck with whatever you do.
winter project: custom t3/t4 turbo and some others
#51296, "RE: Would this work for a setup" In response to Reply # 6
hey. my shit is a custom job. I did it myself. If you have the time, your probably okay to tackle it by yourself also. You will encounter hic-ups and "aww, shit"'s along the way, so be prepared. Holler if you got any questions. tim
USED TO HAVE...Everything you wish you had, and then some...
You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)
Search
Printer-friendly copy
0 Users in Chat
