Like the title says, I need ASAP! Thank You.

Built 420a
NER turbo kit T3/T04s ball bearing
AFX UDP
Crane 0014 cams

Saturated injectors are 12-16ohm. Peak and hold are 2-3 ohm. It's not the resistance thats the ahrd part, its finding a resistor with a high enough wattage rating. Too low, and you'll just destroy the resistor. Don't even THINK of going to Radioshack for them.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

>Saturated injectors are 12-16ohm. Peak and hold are 2-3 ohm.
> It's not the resistance thats the ahrd part, its finding a
>resistor with a high enough wattage rating. Too low, and
>you'll just destroy the resistor. Don't even THINK of going
>to Radioshack for them.

And they have to be carbon type or caborundum resistors
not wire-wound resistors because those have an impedance that varies with the frequency and wire-wounds are at least 80-90% of the power resistors available

Alain

What resistors are they and where do I get them then?

Built 420a
NER turbo kit T3/T04s ball bearing
AFX UDP
Crane 0014 cams

I don't know. I just bought the right injectors to begin with and never had to worry about it.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

if you can find the stock resistor pack off a gst it should work

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

You need 10-Watt 10-Ohm resistors. Some radio shack DO carry them and all CAN order them. I'm using them now... I'll try to get you part numbers.

EDIT:
http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&category%5Fname=CTLG%5F011%5F002%5F014%5F000&product%5Fid=271%2D132

You MUST keep them cool because you don't want a resistor to fail. If so, the fuel injector will fail and you get a lean condition. We all know what that can do!

Sorry for the resurrection, but does anyone have a wiring diagram for the resistors and injectors? TIA.

check in the turbo forum of "things we've seen before". There is a thread in there with all the relative info and the people to PM in case you're still confused.

__________________________________________
~Chris
03 SRT-4

Thanks!