wat's up fellas got a problem with the motor and need help. the car is running in three cylinder. #1 has no compression 0. open up the valve cover and one of the lifter is off the push rod. i think the valve is bent. wat im i looking at. the internal is stock running 5-8 psi of boost. and o yea is it better to buy a built bottom end are should i build one up. does anyone know were i can find a built bottom end.
Thanks

http://www.vtengines.com

NeoVB
2005 Subaru Impreza 2.5RS
1997 Mitsubishi Eclipse GS TURBO
1995 Mitsubishi Galant ES DOHC TURBO
1991 Eagle Talon TSI AWD

>open up the valve cover and one of the lifter is off the push
>rod.

is it an intake valve or an exhaust valve?

>i think the valve is bent. wat im i looking at.

if its a bent valve you just need to pull the head, take off the valve spring and retainer, pull out the old valve, put in the new valve, seat the valve, and put the spring/retainer back on.

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

its on the intak side. how do i know if i bent my value.