| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | problem which motor | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=49432 |
49432, problem which motor
Posted by bomex, May-24-03 03:14 PM
wat's up fellas got a problem with the motor and need help. the car is running in three cylinder. #1 has no compression 0. open up the valve cover and one of the lifter is off the push rod. i think the valve is bent. wat im i looking at. the internal is stock running 5-8 psi of boost. and o yea is it better to buy a built bottom end are should i build one up. does anyone know were i can find a built bottom end.
Thanks
|
49442, RE: problem which motor
Posted by neovb, May-24-03 08:59 PM
http://www.vtengines.com
|
49444, RE: problem which motor
Posted by juggalo, May-24-03 10:46 PM
>open up the valve cover and one of the lifter is off the push
>rod.
is it an intake valve or an exhaust valve?
>i think the valve is bent. wat im i looking at.
if its a bent valve you just need to pull the head, take off the valve spring and retainer, pull out the old valve, put in the new valve, seat the valve, and put the spring/retainer back on.
|
49533, RE: problem which motor
Posted by bomex, May-26-03 06:07 PM
its on the intak side. how do i know if i bent my value.
| |