well i am finnaly boosted!! it feels awesome. i am only running 5 psi right now with FMIC. but she is deffenitly qiuck! but i was running her around today, and as always i have has a check engine light, but i decided to run the code, since it is new to boost, may be something different this time. Well there is, it shows code 12, 21, 55. i know 55 is finished, and 12 is disconecting the battery within last 50 starts, but 21 came back:

"21 PO201 27 Injector #1 control circuit Harness and Connector/Injectors"

What does this mean? what should i be checking for?


thanks

anyone ever thought of a drive-thru parts store? that would be cool!

did ya check the injectors and/or the harness for each one.
do ya know what disc you are running in you FMU?
later
"Z"

i get wierd codes sometimes and there always different, try disconnection the battry and see if it comes back

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

>i get wierd codes sometimes and there always different, try
>disconnection the battry and see if it comes back

yep i was also going to do that just in case... i did burst a fuel line right away, so maybe that did it.

i fixed that right away though... i must have been sleeping when i installed the 8" line from the test port on the fuel rail to the FMU. i used some weak vacuum line for that and it bursted in 2 seconds. i had like 20 some feet of fuel injector hose thats rated to 250 psi, that i used for everything else, but oh well... i replaced it asap, and all is good now, just looking into that code.

thanks for the advise so far!!

anyone ever thought of a drive-thru parts store? that would be cool!

>did ya check the injectors and/or the harness for each one.
>do ya know what disc you are running in you FMU?
>later
>"Z"


i never touched the injectors when i did the install yet, and i have not confirmed which disk i have in the fmu yet. i will be looking into that tommarow, along with installing a fuel pressure gauge.

would this have anything to do with it?

anyone ever thought of a drive-thru parts store? that would be cool!