I need a make myself a catch can to keep the blow by from pushing my oil out. I was thinking, what if the line from the breather was on the bottom of the can so it would suck the oil back into the motor under vac. Then thier would be a line on top that goes to my air filter so once the oil is in it can get air. would this work? tia!

____________________________________________________
four nails four corners four riders and four horses

Instead of running it back to your air filter, why not just get a breather filter for the top of the can?

Allan
2008 Magnetic Black 350z NISMO /1976 Austin Mini 1098 Special (export)

Member# 1980

that would work, but i am wondering if its safe to have the breather suck the oil back in from the can. is this ok?

____________________________________________________
four nails four corners four riders and four horses

17 psi of vac isn't going to be enough to suck the oil back in...
The only way a drain can would work is if you mounted it higher than the valve cover, and let gravity take it's course.

-Danny


" We cannot appeal to the conscience of the world when our own conscience is asleep. " Carl von Ossiet

I don't know about making the oil go back in, but I heard someone say they used a fuel filter as a catch can. I think this sounds kinda cool cause you can see when it gets full. Just an idea... anyone done this with pics?


1996 Eclipse RS / 5-Speed / More at www.dalnetcars.com
Mark Galyan - Greenwood, Indiana