i seen someone post these pics up before... it was the complete break down of all the parts..... i searched but came up empty... anyone have these pics...
and what special tools do i need when installing the HRC kit... i have 2 huge tool boxes with tools but i remember someone saying you need a special tool...
TIA

2006 WW IX MR
2003 BBY EVO VIII (sold)
256.9WHP & 277.9torque
http://s90395832.onlinehome.us/forum//index.php?sid=a70942a7f65043e6c873e12dcd300692

1998 Eclipse RS --show car--

the only special tool that I remember needing was the oil sender socket, and a schrader valve removal (tire stem). Both tool coombines should be under 10$

-K-

The oil sending socket is a DEEP WELL 1 1/16" socket. I'd recommend the 6 sided over the 12 sided, it'll grip better. A few swivel heads will ease some stuff too. Patience is a virtue, trust me on this one! Also, get a long extension for some of those hard-to-rech bolts. Where are you located? Anywhere near VA? If so, I'm more than happy to give you a hand!

Jeremy

96 Indy Red Dodge Avenger I4 5spd
225.7whp/227.2wtq @ 10psi, currently running 12-14psi.
HRC Stage III turbo setup
JE 8.8:1 pistons
Eagle rods
block bored .020" over
GReddy FMIC w/ custom piping
1G crushed BOV
SPEC Stage 3 clutch
2.5" DP, 2.5" high flow cat, 3" ERT catback w/ Magnaflow muffler and 3" tip.
much much more...

I am not sure if this is what you remember but after the install I had to buy a crows foot wrench for those damn hard to reach bolts on the downpipe.


http://www.cardomain.com/id/jasvbts2k2
"The ONLY Honda I'd mod would be ASIMO"

>I am not sure if this is what you remember but after the
>install I had to buy a crows foot wrench for those damn hard
>to reach bolts on the downpipe.
>
>
>http://www.cardomain.com/id/jasvbts2k2
>"The ONLY Honda I'd mod would be ASIMO"


what's a crow foot wrench.... i never heard of it..

2006 WW IX MR
2003 BBY EVO VIII (sold)
256.9WHP & 277.9torque
http://s90395832.onlinehome.us/forum//index.php?sid=a70942a7f65043e6c873e12dcd300692

1998 Eclipse RS --show car--

hard to explain, go to a part store and ask. you'll see.

Oh, and gods gift to the turbo install was a dremel.

__________________________________________
~Chris
03 SRT-4

Um what is the dremel for?

Crows foot: Looks like a stubby opened in wrench... REALLY STUBBY, instead of a handle of the open ended wrench you get a square where you put a socket or extention. I never used them though. Only tool I bought for the whole thing was a OIL Sender socket. It was like $2 at Auto Zone.

-Danny


" We cannot appeal to the conscience of the world when our own conscience is asleep. " Carl von Ossiet

F the dremel!! Roto-Zip baby!!!

____________________________________________________
four nails four corners four riders and four horses