ALright i know everyone is probably sick of this question but ive just about read through every forum about the nos topic. How about someone post in detail how to install the wet kit. Im about to get mine but im not sure about the fuel rail and solinoid part. Where exactly to you inject the nos into the 420A. I know you have to tap on the fuel rail to get the fuel but from there on im kinda lost. If anyone can post a full detail instruction of the installation of this kit im sure it would answer a ton of questions including mine. Thanks for any replys.
#43652, "RE: in detail wet kit install" In response to Reply # 0
You have to tap off of the end of the fuel rail and send a line to the FUEL solenoid. The nitrous comes from the Bottle to a NITROUS solenoid. The output of the solenoids go to a FOGGER type nozzle. The fuel and nitrous spray in to the intake pipe before the throttle body thru the nozzle. When the nitrous is activated the solenoids open and you FLY!!!
KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit Ported Intake Manifold Ported Throttle Body Custom 2 1/4 inch exhaust Empty Catalytic Convertor 225/50/16inch Wheels and Tires
Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...
#43653, "RE: in detail wet kit install" In response to Reply # 1
You use a fitting into the test port to tap off the rail unless you dont have one (you should). The instructions are detailed enough once you recieve the kit. We'd just tell you the same thing. It tells you how far to mount the nozzle and where to hook up the lines and solinoids too. All I can tell you is to use loctite blue 242 where it requires teflon paste (instructions will tell you that too).
Since I cant use photopoint IMAGINE THIS: Star turbo with E-trim and HKS BOV Starion FMIC/2.5" piping Joe P MBC Apexi SuperAFC Ross Pistons/total seal rings Ported and matched intake manifold AFX 55mm TB, FMM and UDP 2.5" downpipe back exh/Hayame muffler Crane wires/Denso Iridium plugs Centerforce DF clutch KYB AGX struts/ST springs, UPR FSB, F&R camber kits 17" ADR lightnings/toyo FZ4 215/45/17 97' eclipse front end/projectors Autometer gauges Panasonic head unit/ Sony X-over MB Quarts all around/JL stealth sub Hifonics/MTX Thunder amps XX brand alarm/Varad hyper green led
Stan2gnt Stan2va@aol.com 95 Talon 420A-Turbo Former and future nitrous user
:farfrommugen: Yes I still own a 2gnt. Damn right I've been here longer than U klassic_liven@yahoo.com
#43654, "RE: in detail wet kit install" In response to Reply # 1
LAST EDITED ON 21-Jul-01 AT 08:31 AM (PST)
Fast 420A thanks alot i just wanted to know before i ordered anything, is there an exact spot where i put the fogger? Also what fuel pump do you recommend, and do i really need one? thanks
Search
Printer-friendly copy
1 User in Chat
