| Go back to previous topic | |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | in detail wet kit install |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=43651 |
|
43651, in detail wet kit install Posted by aemDSM, Jul-20-01 04:27 PM ALright i know everyone is probably sick of this question but ive just about read through every forum about the nos topic. How about someone post in detail how to install the wet kit. Im about to get mine but im not sure about the fuel rail and solinoid part. Where exactly to you inject the nos into the 420A. I know you have to tap on the fuel rail to get the fuel but from there on im kinda lost. If anyone can post a full detail instruction of the installation of this kit im sure it would answer a ton of questions including mine. Thanks for any replys. | |
|
43652, RE: in detail wet kit install Posted by Fast420A, Jul-20-01 05:08 PM You have to tap off of the end of the fuel rail and send a line to the FUEL solenoid. The nitrous comes from the Bottle to a NITROUS solenoid. The output of the solenoids go to a FOGGER type nozzle. The fuel and nitrous spray in to the intake pipe before the throttle body thru the nozzle. When the nitrous is activated the solenoids open and you FLY!!! | |
|
43653, RE: in detail wet kit install Posted by Stan2gnt, Jul-20-01 09:50 PM You use a fitting into the test port to tap off the rail unless you dont have one (you should). The instructions are detailed enough once you recieve the kit. We'd just tell you the same thing. It tells you how far to mount the nozzle and where to hook up the lines and solinoids too. All I can tell you is to use loctite blue 242 where it requires teflon paste (instructions will tell you that too). | |
|
43654, RE: in detail wet kit install Posted by aemDSM, Jul-21-01 03:29 AM LAST EDITED ON 21-Jul-01 AT 08:31 AM (PST) | |
