Hey has anyone herd good thing about this system. What is the best system out their? I want to get the best! So whats up with the venom nitrous??

venomtalon@aol.com

Performance Mods: Custom CAI, Jeep 60mm TB, Ported Intake Manifold with Jeep TB match, 5 angle valve job, Head milled .020, Regrind Cams, PT Lifters and Rockers, AEM Cam Gears, OBX Wires, NGK Plugs, AFX UDP, OBX Header, OBX

I heard the zex system was good.

Zex and Venom won't work with our cars. They work off the voltage on the TPS which ours is lower than it needs. You have to get a standard EFI kit from NOS, NX, Nitrous Works.. . .


http://hometown.aol.com/ohshootuhh/

All Motor Beast in need of MAJOR TUNING

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Nameless Cold Air Intake with a K&N Filter
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

Venom tells me it should work fine. Where did you here this about the TPS? The venom Basic Nitrous only works at full throttle, so why won't it work? I wanted to get the Basic nitrous to be safer than the rest.

venomtalon@aol.com

Performance Mods: Custom CAI, Jeep 60mm TB, Ported Intake Manifold with Jeep TB match, 5 angle valve job, Head milled .020, Regrind Cams, PT Lifters and Rockers, AEM Cam Gears, OBX Wires, NGK Plugs, AFX UDP, OBX Header, OBX

of course they'll tell you that they want to sell it!

Chris Dishmon
chrisdishmon@hotmail.com or
chrisdishmon@yahoo.com (pretty original, huh?)

http://www.threebrain.com/weeeeee.html

1990 GSX (14.1 in the 1/4 mile, so far)
1997 RS (it just looks neat)

They're right. It won't work unless you have an OBD I car. This has the return line on the fuel system. That's the only way those "dry" systems will work. If you have an OBD II car, you'll have to go with a wet kit. I believe the new, cheaper system venom put out has this same limitation.

Christian
99 GS Anniversary Edition


http://www.ichibanracing.com/

Christian
06 GG IX MR SE
http://www.ichibanracing.com/ is DOWN!! In between hosts.

Look is says that you can use it if you don't have a fuel return line!!


Venom VCN-1000 Basic Nitrous System
The VCN-1000 is venom's new entry level nitrous system. The system is built using Venom's proprietary closed loop fuel control system which insures the proper air fuel ratio under all operating conditions. The system features an advanced microprocessor based control module that will automatically terminate the flow of nitrous if the air fuel mixture becomes to lean.

You control the flow of nitrous to your engine using various sized nozzles (each kit contains 4 nozzles), the module will automatically control the fuel flow to your engine using your existing fuel injectors. No modifications to fuel pressure of fuel system plumbing is required and best of all it works on new fuel systems that do not include a fuel return line.


so why would they say that??? This system seems to be the safest out their. Where did you here it wont work? Has anyone ever tryed it??? They have dyno charts of a 2000 neon on thier web site? I don't know, but I think i'm going to try this system.

venomtalon@aol.com

Performance Mods: Custom CAI, Jeep 60mm TB, Ported Intake Manifold with Jeep TB match, 5 angle valve job, Head milled .020, Regrind Cams, PT Lifters and Rockers, AEM Cam Gears, OBX Wires, NGK Plugs, AFX UDP, OBX Header, OBX

by the way this is going on a 1995 Eagle Talon. I just read in a message that you can use the venom nitrous??? I don't know what the hell is going on? Does anyone know what the voltage of our TPS is??

venomtalon@aol.com

Performance Mods: Custom CAI, Jeep 60mm TB, Ported Intake Manifold with Jeep TB match, 5 angle valve job, Head milled .020, Regrind Cams, PT Lifters and Rockers, AEM Cam Gears, OBX Wires, NGK Plugs, AFX UDP, OBX Header, OBX