I getting nitrous this week (50 shot) and need to know when and how much to retard.

Like what RPM should I start it at?
How much to retard for a 50 shot?

I have a MSD DIS-2. So you can give me the code as well if you know it.

venomtalon@aol.com

Performance Mods: Custom CAI, Jeep 60mm TB, Ported Intake Manifold with Jeep TB match, 5 angle valve job, Head milled .020, Regrind Cams, PT Lifters and Rockers, AEM Cam Gears, OBX Wires, NGK Plugs, AFX UDP, OBX Header, OBX

You don't have to retard timing when running a little 50 shot. You can run a 75 shot without having to retard the timing. I run a 60 shot with the Venom VCN-1000 and my timing was left alone, no problems.

And for the RPM's, are you talking at which RPM to engage the N2O or is that dealing with the timing question?

Custom Computers
http://www.virtual-octane.net

you do not need to retard your timing with a 50 shot. You should only have to retard you timing when going above a 75 shot.

A few people have told me that you need to retard timing. I'm going to retard anyway, just to be safe. So can anyone help me set up my MSD?

venomtalon@aol.com

Performance Mods: Custom CAI, Jeep 60mm TB, Ported Intake Manifold with Jeep TB match, 5 angle valve job, Head milled .020, Regrind Cams, PT Lifters and Rockers, AEM Cam Gears, OBX Wires, NGK Plugs, AFX UDP, OBX Header, OBX

Hey I'm running a 75 shot with a msd dis 2. my retard is at 7 degrees. Also get a wet kit, I'am converting to a wet fogger kit next week when my stuff gets in. I'm going with a 80 shot jet. If you don't have a S-AFC get one they are really nice,especially for tunning.

webpage
gskickin.tripod.com