Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectRetarding timing?
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=41400
41400, Retarding timing?
Posted by Talon95Stang, Jun-18-02 06:56 AM
I getting nitrous this week (50 shot) and need to know when and how much to retard.

Like what RPM should I start it at?
How much to retard for a 50 shot?

I have a MSD DIS-2. So you can give me the code as well if you know it.
41401, RE: Retarding timing?
Posted by BlitzdEclipse99, Jun-18-02 07:21 AM
You don't have to retard timing when running a little 50 shot. You can run a 75 shot without having to retard the timing. I run a 60 shot with the Venom VCN-1000 and my timing was left alone, no problems.

And for the RPM's, are you talking at which RPM to engage the N2O or is that dealing with the timing question?


41402, RE: Retarding timing?
Posted by 99Silver1100, Jun-18-02 02:14 PM
you do not need to retard your timing with a 50 shot. You should only have to retard you timing when going above a 75 shot.
41403, RE: Retarding timing?
Posted by Talon95Stang, Jun-19-02 05:28 AM
A few people have told me that you need to retard timing. I'm going to retard anyway, just to be safe. So can anyone help me set up my MSD?
41404, RE: Retarding timing?
Posted by nosgs, Jun-19-02 07:21 AM
Hey I'm running a 75 shot with a msd dis 2. my retard is at 7 degrees. Also get a wet kit, I'am converting to a wet fogger kit next week when my stuff gets in. I'm going with a 80 shot jet. If you don't have a S-AFC get one they are really nice,especially for tunning.

webpage
gskickin.tripod.com


:thumbsup