can i use a neon t3 turbo manifold on our 2gnt

www.LowGravitycc.com

no.. the neon manifold does not have the same bolt pattern ours does, nor does it even sit on the same side.. but u can use a flange (meaning u should be able to weld a t3 flange to the manifold for the 2gs).. I have a manifold from turbonetics (they make stars manifolds) and it has a t3 flange on it already=).. try that

~Lisa~


2.0 420a w/ lots of customs=)

hit me up i got cheap 2gnt manifolds =) ours dont crack either =)

Bill

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

>no.. the neon manifold does not have the same bolt pattern
>ours does, nor does it even sit on the same side..

Well, the bolt patterns ARE the same for both the neon and the 420a n/t eclipse. (You can confirm this by merely comparing exhaust manifold gaskets for each car. I've used neon ones before)

However, as Lisa's already made the point, the turbo may not be located in the proper location. Our turbos have to mount either directly in the center, or over to the right, but if the neon manifold creates too much of a left(passenger side) side location for the turbo, it won't work.

_____________________________________
Jason ESi-T

04' BMW 325Ci
91' Nissan 240SX
98' Eagle Talon ESi (sold)