Hey guys,


I'm checking on who would be interested in buying some Pauter x beam rods and or some Arias pistons

Pauter to my knowledge have been better then Crower since all the Crower rods and cams have been going down quality wise and 3 of my distributors wont even carry them any more..

So heres the deal 2.0 pauter rods, x beam variety price would be 600-800$ for a set depending on how many we get going..

the Arias pistons are a much superior setup than JE's, they use a tapered wall to prevent piston slap when cold, and a bunch more features,

the best part is i would cater to what ever compression ratio people wanted..

i was thinking maybe these flavors if interested..
8.5:1
9:1
11:1

maybe a evil 13.5:1 or 14:1

let me know interest on these pistons all of them would be setup for OS valves

Bill
im open to suggestions on what people want, i can proabably get some super light Aluminum rods going too if thats peoples interest...

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

An 11:1 piston option would be nice.

How much power could the aluminum rods handle? Also, about how much would they be?


95 Eclipse RS : 5 speed
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

I'm interested in some 8.5:1 pistons .040 oversized. Maybe some x-beams too, if the price is good.

I'll be interested in the aluminum rods and the arias pistons in about 8 months. I'm gonna get rid of this howell block that has a curse on my car.

Matt
1995 Eclipse GS
2.0L, S16g Turbo, 8 Injectors, 26psi

1998 Eclipse GSX
2.3L Stroker, AEM EMS Converted to Speed Density, FP3065 Turbo, 35psi , and so on...

i would be ineterested in the 8s in a few months... prices maybe?


are you having more problems matt???

______________________________
Matt D.
'06 Evo IX SE
'98 RS-T 13.8 @ 106.1

the aluminum rods would be about 600-700$ or so..

the arias pistons wouldn't be any more then the retail JE's now unless i was doing single sets then they are expensive.. its 650$ for 1 set of customs...

but if i do like 3 or 5 sets the price is much much cheaper..

so peoples liek the 8.5:1 idea and the 11:1 ideas..

would u guys like 8.6:1 8.6:1 or 8.8:1 like je does?

and looks like 2 or so interested in pauters?

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

I'm looking for pistons as well, but would rather get something closer to the stock CR. The 9:1 sounded good

99GS MT | Star Stage 2 | GC coilovers | HurriganeGS tie bars | Tokico Illuminas | 17x7 Enkei RS5 | Baer track brakes |+

okay thats cool any more?

i have JE 8.8:1 if u want those pm me (if u need them real soon, other wise id wait and get the better arias pistons)

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

I'd like to wait. Any idea on the time frame for availability?

99GS MT | Star Stage 2 | GC coilovers | HurriganeGS tie bars | Tokico Illuminas | 17x7 Enkei RS5 | Baer track brakes |+

i think its about 4-6weeks from the time i send in the piston /rod to have them built..

id like to have atleast 3 orders for each part other wise it will be too expensive to be worthwhile..

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

I'm interested in the pistons. 8.5:1 More power on pump gas! Arias makes a great piston. I was gonna order a set either way.

Greg Williamson
1999 Eclipse GS "Sport" (Sold)
Star Stage III
12.817 @ 109.36

If i hadnt just bought this block, i would have been very interested. Pauter and arias both make excellent stuff. good luck w/ the goup buy

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

bumpity any more people interested?

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

9:1?

I wish i had money.

16.1 @ 87.11
http://www.virtuallyinfamous.com

ARD 57mm tb and p&p manifold, Neuspeed STB, Pro-kits, Illuminas, Injen CAI with K&N, 2.5" pacesetter catback,
AF/X UDP, Rear STB, Powerslot rotors, RRE SS Brakelines.

MotoFool,
Are you just waiting on more interest or what's your plan? If it's going to take 4-6 weeks, I'd like to go ahead and get it started, but if there's not enough interest, I guess we have to wait.

99GS MT | Star Stage 2 | GC coilovers | HurriganeGS tie bars | Tokico Illuminas | 17x7 Enkei RS5 | Baer track brakes |+

Down the road would be interestedin pistons.

I say your variety should be:

8.5:1 (for insane boost junkies)
9.6:1 (for those that don't want to drop from stock)
10.5:1
11.5:1 (I think would be a very popular all motor piston)
12.5:1
And some insane 13.5-14:1



15.9 @ 86.7mph
97 Eclipse RS

Injen CAI, 55mm TB, P&P Intake, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, Crane Ign Amp, S-AFC

if thats what people want, ive had a few inquirys about 9:1's before i started this thread thats why i put 9:1

any more suggestions?

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

I agree on the Lowest, 8.5:1, 9:1, stock, 11.5:1 and a BEASTLY 13.5:1
________________________________________________________________________________________
Car Sold


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

I'm interested in a set of 9:1 or possibly stock compression.

Christian
06 GG IX MR SE
http://www.ichibanracing.com/ is DOWN!! In between hosts.

i would be interested in 8:6:1 ,soon

i would be interested in some pauter rods. what kinds does Pauter make? i got a price of $720 for those..
thanks
Michael 99gs
HRC Stage 2 @12psi
Stage 3 process begins gathering parts for rebuild
2GNT Member #32

http://www.dreamwater.net/purplebeast

go 8.5:1....too bad u took too long to bring this out, i already got a Wiseco Forged piston but i got mine for $405 ...im telling you, even with this lower compression, you can't hardly tell the difference from stock..but man, boostin over 15 pounds...engine loves it

<img src="">

~OZ 10th Annv. Edition~