Hey guys,


I'm checking on who would be interested in buying some Pauter x beam rods and or some Arias pistons

Pauter to my knowledge have been better then Crower since all the Crower rods and cams have been going down quality wise and 3 of my distributors wont even carry them any more..

So heres the deal 2.0 pauter rods, x beam variety price would be 600-800$ for a set depending on how many we get going..

the Arias pistons are a much superior setup than JE's, they use a tapered wall to prevent piston slap when cold, and a bunch more features,

the best part is i would cater to what ever compression ratio people wanted..

i was thinking maybe these flavors if interested..
8.5:1
9:1
11:1

maybe a evil 13.5:1 or 14:1

let me know interest on these pistons all of them would be setup for OS valves

Bill
im open to suggestions on what people want, i can proabably get some super light Aluminum rods going too if thats peoples interest...

An 11:1 piston option would be nice.

How much power could the aluminum rods handle? Also, about how much would they be?


95 Eclipse RS : 5 speed
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

I'm interested in some 8.5:1 pistons .040 oversized. Maybe some x-beams too, if the price is good.

I'll be interested in the aluminum rods and the arias pistons in about 8 months. I'm gonna get rid of this howell block that has a curse on my car.

i would be ineterested in the 8s in a few months... prices maybe?


are you having more problems matt???

the aluminum rods would be about 600-700$ or so..

the arias pistons wouldn't be any more then the retail JE's now unless i was doing single sets then they are expensive.. its 650$ for 1 set of customs...

but if i do like 3 or 5 sets the price is much much cheaper..

so peoples liek the 8.5:1 idea and the 11:1 ideas..

would u guys like 8.6:1 8.6:1 or 8.8:1 like je does?

and looks like 2 or so interested in pauters?

I'm looking for pistons as well, but would rather get something closer to the stock CR. The 9:1 sounded good

okay thats cool any more?

i have JE 8.8:1 if u want those pm me (if u need them real soon, other wise id wait and get the better arias pistons)

I'd like to wait. Any idea on the time frame for availability?

i think its about 4-6weeks from the time i send in the piston /rod to have them built..

id like to have atleast 3 orders for each part other wise it will be too expensive to be worthwhile..

I'm interested in the pistons. 8.5:1 }( More power on pump gas! Arias makes a great piston. I was gonna order a set either way.

If i hadnt just bought this block, i would have been very interested. Pauter and arias both make excellent stuff. good luck w/ the goup buy

bumpity any more people interested?

9:1? :thumbsup

I wish i had money. :(

MotoFool,
Are you just waiting on more interest or what's your plan? If it's going to take 4-6 weeks, I'd like to go ahead and get it started, but if there's not enough interest, I guess we have to wait.

Down the road would be interestedin pistons.

I say your variety should be:

8.5:1 (for insane boost junkies)
9.6:1 (for those that don't want to drop from stock)
10.5:1
11.5:1 (I think would be a very popular all motor piston)
12.5:1
And some insane 13.5-14:1



15.9 @ 86.7mph
97 Eclipse RS

Injen CAI, 55mm TB, P&P Intake, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, Crane Ign Amp, S-AFC

if thats what people want, ive had a few inquirys about 9:1's before i started this thread thats why i put 9:1

any more suggestions?

I agree on the Lowest, 8.5:1, 9:1, stock, 11.5:1 and a BEASTLY 13.5:1
________________________________________________________________________________________
Car Sold


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

I'm interested in a set of 9:1 or possibly stock compression.

i would be interested in 8:6:1 ,soon

i would be interested in some pauter rods. what kinds does Pauter make? i got a price of $720 for those..
thanks
Michael 99gs
HRC Stage 2 @12psi :D
Stage 3 process begins gathering parts for rebuild
2GNT Member #32

http://www.dreamwater.net/purplebeast

go 8.5:1....too bad u took too long to bring this out, i already got a Wiseco Forged piston but i got mine for $405 ...im telling you, even with this lower compression, you can't hardly tell the difference from stock..but man, boostin over 15 pounds...engine loves it :thumbsup