#38868, "How hard is it to change the endtanks on a starion fmic?"
I just got my starion saturday and I want to mount it ASAP. Problem is, the endtank inlet/outlets are like 1.5 inches in diameter (estimated) and the piping for the HRC kit is what, 2.25? Is it possible to reweld in/out pipes on the fmic or can I just use couplers to attach it to the HRC piping? I'm also going to get 2.25 mandrel bends from JCWhitney. Thanks for the help.
#38871, "RE: How hard is it to change the endtanks on a starion fmic?" In response to Reply # 0
You can use couplers to make it work but this will be a restriction in the flow which can slow down how fast you spool and can also cause a lot more pressure loss than a properly modified one will.
#38872, "RE: How hard is it to change the endtanks on a starion fmic?" In response to Reply # 1
So you'd recommend altering it before I mount it? It would probably make it alot easier then messing with different sized couplers. Would changing the inlet/outlet mess anything up flowwise for an intercooler that came stock with smaller ins and outs?
Search
Printer-friendly copy
1 User in Chat
