| Go back to previous topic | |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | How hard is it to change the endtanks on a starion fmic? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=38868 |
|
38868, How hard is it to change the endtanks on a starion fmic? Posted by Axewhlder, Feb-10-03 05:47 AM I just got my starion saturday and I want to mount it ASAP. Problem is, the endtank inlet/outlets are like 1.5 inches in diameter (estimated) and the piping for the HRC kit is what, 2.25? Is it possible to reweld in/out pipes on the fmic or can I just use couplers to attach it to the HRC piping? I'm also going to get 2.25 mandrel bends from JCWhitney. Thanks for the help. | |
|
38871, RE: How hard is it to change the endtanks on a starion fmic? Posted by Fast420A, Feb-10-03 06:20 AM You can use couplers to make it work but this will be a restriction in the flow which can slow down how fast you spool and can also cause a lot more pressure loss than a properly modified one will. | |
|
38872, RE: How hard is it to change the endtanks on a starion fmic? Posted by Axewhlder, Feb-10-03 06:27 AM So you'd recommend altering it before I mount it? It would probably make it alot easier then messing with different sized couplers. Would changing the inlet/outlet mess anything up flowwise for an intercooler that came stock with smaller ins and outs? | |
