I am having 2.5" High Quality Mandrel Bent Aluminized Downpipes made for the 2gnt's with the Hahnracecraft Turbo. They will have factory like flex section, o2 housing, and brackets. They will be a direct bolt-on. Email me or give me a call if you have any questions. Kooks Custom Headers is making them. I will have them next Tuesday.

esseclipse@aol.com
413-822-4946 Mike

SICK! it's about time - i've dealt with a dented downpipe (previous owner ran over a stop sign, don't ask) since i got the car over a year and a half ago and have been itching to find a new one, but i don't want to deal with custom piping. i'm also not a big fan of the clamp on downpipe that comes with the hahn kit. (exhaust leaks galore unless you braze it like i did) maybe this competition will start ERT to get on their feet and actually finish their deveopment for their HRC downpipe causing pricing for both products to drop...

...speaking of which, how much is the downpipe? i'm definately interested.

2016 WRX STi Limited (current)
2001 A4 1.8tqms (donated)
1991 GVR4 #1933 (sold)
old.dsmregistry.com/detail.php?carid=218 (dismantled)

maybe this competition will start ERT to get on
>their feet and actually finish their deveopment for their
>HRC downpipe causing pricing for both products to drop...
>


Well, maybe if someone w/ a HRC kit would actually GO TO ERT so it can be made in the first place.

Steve owns a v6 avenger, he doesnt have a hrc equipped 420a at his dispossal...

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

hey, if ERT was based in massachusetts i'd take one for the team and enroll my car with broken piston ring landings in their beta test guinea pig/victim/whatever program any day.

...ha

2016 WRX STi Limited (current)
2001 A4 1.8tqms (donated)
1991 GVR4 #1933 (sold)
old.dsmregistry.com/detail.php?carid=218 (dismantled)

I hear ya, im in florida :/

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

Someone buy me a turbo kit and Ill do it, I live like 10 minutes down the street from steve (ERT).

Hes got some neat stuff in the works, and the v6 turbo kit is a beautiful piece of artwork

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

if everyone on the board threw in like $2 we'd all be set

EDIT: just for the record, i wouldn't want to go much over $300...

2016 WRX STi Limited (current)
2001 A4 1.8tqms (donated)
1991 GVR4 #1933 (sold)
old.dsmregistry.com/detail.php?carid=218 (dismantled)

I am doing it like a groupbuy. The more people we can get the cheaper they will be.

5 people $425

10 people $350 and so on.

I have 4 people that want them so far so the more people we can get by the begining of next week the cheaper I can sell em for. Shiping will be extra. Thanks and spread the word....

can we see some pixs of this $400 dp? is it one piece? or two piece?.. also if you got more then 10 people could you go lower then $350 each?


Michael 99gs
HRC Stage 2
Stage 3 process begins gathering parts for rebuild

http://www.dreamwater.net/purplebeast

Michael
99gs hrc stage 5000 SOLD...
2004 Honda Accord V6 (240 hp)stock
what other car should i buy?? hmmm
Car info & pictures at http://www.cardomain.com/memberpage/520269

better be titanium for 350, here in va, i can get custom dp all day "race quality " for 180, providing you have your own flange. and those arent but 25 bux. and thats 3inches. if i had him make 10 of them, he proably wouldnt charge but 100 a peice, if not cheaper. 350 for a 2.5 dp is really steep.

AIR RIDE SUSPENSION UP FOR GRABS.
Dwayne H
A.K.A D-low
2001 SUZUKI GSX-R>>BLACK/RED
YOSHI SLIP ON, FC COMMANDER STAGE 3 JET KIT.
Daily Grind: 1994 B18c1 powered Black civic coupe. h&r springs, 16 inch mugen knockoffs, CAI, rsr catback. just a beater i picked up for 4200.
1997 mitsubishi gs
"FRANKN4"
Fully built motor, SOON TO BE FRANKED THA FUCK OUT,Hrc stage 3, 19 inch rollers, Big Brakes, Targa top conversion, custom hood,supra taillights, trd wing with cf, kaminari widebody kit, air ride, autometer guages and all of Apexi Sacf, avc-r, rev/speed meter. interior fully glassed, tenzo r seats, pics soon to come!

Once again something comes along to late, I already had one of my buddys weld some 2.5" piping onto the end of the HRC DP and then run it staright back and eliminated the cat in the process, whole job including flex section and O2 bung ran me 80 bucks and it's all mandrel bent..
Only thing I lose is the small section from the HRC pipe isn;t 2.5" but the rest is....

We need 5 more people and I will be able to sell them fore $325 each. Email me or give me a call if you have any questions. esseclipse@aol.com 413-822-4946 Mike

Bump

Just some more info. The Downpipes will be made of 16 gauge Aluminized steel (Aluminum Coated). The Downpipe will be two pieces. Email me with any questions esseclipse@aol.com or call me at 413-822-4946 Mike

We have enough people so I can sell $325.each plus shipping. They are made by Kooks Custom Headers they are 2 Piece, 16 Gauge Aluminized Steel (Aluminum Coating), Mandrel bent, 3/8" Flanges, Stainless Steel Flex Section. High Quality Gaskets will be included. Pics will be up Tuesday Night and I will be shipping them out starting Wednesday. Send me your email address to recieve pics and any additional info.