I know this has been adressed before, but I wanted a little clarification myself.
What injectors from other cars can we use on our cars?
For instance, do our fuel rails accept Ford injectors, GM injectors? Is there a standard out there?
I know Chris (Murix) used some injectors off a big domestic. Obviously, this is the way to go cost-wise. I could get 8 injectors in many cases for much less than it would cost me to get four from an aftermarket import thief....errr..retailer.
I undersand the differences in Peak and Hold and Saturated and that's fine, but if anyone could specify a more narrow or specific type of injecor we currently use so that I can pilfer off the cheap domestic fuel rails, I would really appreciate it.
Jason 98' Eagle Talon ESi-T Mitsu Super 16g Turbo(HRC)
#3184, "RE: Fuel Injectors Question" In response to Reply # 1
Im pretty certain that all domestic injectors are the same, however there might be a couple of o-ring sizes so you have to watch out for that. As for using the Domestic injectors i believe you can use the BOSCH universal injectors which are sold through http://www.vortechsupercharger.com for about $35 a piece !!!!
BTW: most domestic injectors are rated by (lbs/hr) an easy way to convert this to cc/min is multiply (lbs/hr)x(10.5)=(cc/min)
#3186, "RE: Fuel Injectors Question" In response to Reply # 0
My injectors are Bosch. They are not actually the factory injecotrs, but aftermarket ones put in there. Most factory injectors will actually still be too small. Most domestics make less hp/liter than we do so they have pretty small injectors. Look for something using Bosch then see how they size up.