I know this has been adressed before, but I wanted a little clarification myself.

What injectors from other cars can we use on our cars?

For instance, do our fuel rails accept Ford injectors, GM injectors? Is there a standard out there?

I know Chris (Murix) used some injectors off a big domestic. Obviously, this is the way to go cost-wise. I could get 8 injectors in many cases for much less than it would cost me to get four from an aftermarket import thief....errr..retailer.

I undersand the differences in Peak and Hold and Saturated and that's fine, but if anyone could specify a more narrow or specific type of injecor we currently use so that I can pilfer off the cheap domestic fuel rails, I would really appreciate it.


Jason
98' Eagle Talon ESi-T
Mitsu Super 16g Turbo(HRC)


http://springfielddsm.homestead.com/JasonsPics.html

What kind of injectors do the Dogde Vipers use??

Im pretty certain that all domestic injectors are the same, however there might be a couple of o-ring sizes so you have to watch out for that. As for using the Domestic injectors i believe
you can use the BOSCH universal injectors which are sold through http://www.vortechsupercharger.com for about $35 a piece !!!!

BTW: most domestic injectors are rated by (lbs/hr) an easy way to convert this to cc/min is multiply (lbs/hr)x(10.5)=(cc/min)

I have come up with a list of cars that may be suitable though: I haven't checked it out personally:

Corvertte LT series, LS series
Dodge Viper
Camaros
Firebirds

I was also thinking would injectors from a truck work? Like Dodge Dakota? Or Ford FXXX ???



l e o n

My injectors are Bosch. They are not actually the factory injecotrs, but aftermarket ones put in there. Most factory injectors will actually still be too small. Most domestics make less hp/liter than we do so they have pretty small injectors. Look for something using Bosch then see how they size up.

MuRiX
97 Eclipse GS HRC Stage II
And a whole lot of other mods...
89 Accord LSi - yes it's mine :(
http://murix.home.icq.com/index.html