okay will i get any creep on a s16g at 15 psi? i am having a little issue right now. my avcr may be the problem. well, if i put the car in any gear, say 3rd. and floor it the boost rises to my preset number, then after a second or so it spikes. my controller is set at .8 bar, and it has spiked to .95 bar once while doing this, but at lower boost settings it is fine, do you think its my boost controller or am i getting creep? thanks james
#31656, "RE: boost creep on a hrc super 16g" In response to Reply # 0
no. the turbine housing is too big to get boost creep in your situation.
A.D.P. "...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all." bring it on............
A.D.P. "...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all." bring it on...........
#31658, "RE: boost creep on a hrc super 16g" In response to Reply # 1
I haven't experienced any boost creep from my Super 16G. Unless you have a 3" dp, you might want to check the AVC-R. I experienced boost spike around 15-17 psi, but that was because of my manual boost controller.
___________ Kon C
"Sometimes, a man has to do what a man has to do."
#31659, "RE: boost creep on a hrc super 16g" In response to Reply # 3
okay, my avc-r went into self learn mode and now it don't do it anymore, i think i haven't drove it hard enough before for it to do that so the avcr hasn't had time to learn that rpm. so now it is steadily coming down it used to hit .95 now it only hits .9 and i bet if i drive it more it will eventually get down to .8, but fuck that i'm going to turn it up to 1.0 bar, its ready for it. lates james
Search
Printer-friendly copy
0 Users in Chat
