Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 1 User in Chat
Top 2GNT Technical Turbo/Nitrous Tech topic #28487
View in linear mode

Subject: "questions before I install 440's and AFC.." Previous topic | Next topic
96vengerAug-08-02 06:41 AM
Old School 2GNTer
388 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#28487, "questions before I install 440's and AFC.."


          

I was just about to install my afc but I started reading on how important it is to have an A/F gauge and EGT gauge.
I have both EXCEPT EGT is not installed yet, and my o2 sensor is bad so my a/f readings probably arenn't very accurate.
Should I get a new one and install EGT before I do anything else??

The reason I am asking is becasue I want to do this but I don't want to wait for a new o2 and I don't have all the fittings to install the EGT ......all I have is the probe itself (suggestions on this would help too)

Thanks
Mark

Mark Dollar
Stage 3-4 Turbo
See my White Avenger @
WWW.Armond30.com

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

brynden29Aug-08-02 07:04 AM
Donating 2GNT member
4079 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#28488, "RE: questions before I install 440's and AFC.."
In response to Reply # 0


          

>I was just about to install my afc but I started reading on
>how important it is to have an A/F gauge and EGT gauge.

Both are important.

>I have both EXCEPT EGT is not installed yet, and my o2
>sensor is bad so my a/f readings probably arenn't very
>accurate.

You need them both to tune it properly.

>Should I get a new one and install EGT before I do anything
>else??

Yes. There will be no way to tell if you are running rich or lean and where your EGT's are. Once you put your 440's in, you will be way too rich and you will need to lean it out, but you can not tell how much to lean it without the proper gauges.

>
>The reason I am asking is becasue I want to do this but I
>don't want to wait for a new o2 and I don't have all the
>fittings to install the EGT

I would wait to install the safc until you have a new o2 and the EGT gauge installed.

......all I have is the probe
>itself (suggestions on this would help too)

What type of probe do you have? I used the tap kind. All you have to do is go buy a tap with the same thread pattern as your probe. Drill the proper size hole in the exhaust mani closest to the #4 cylinder. Slowly screw the tap in and then back it out. Screw in the probe and run the wires... bam, you are done. (make sure you have the car running when you drill the hole to try to force the shavings out) It is not hard at all. I did it on my lunch break. Just take your time with the tap.

>
>Thanks
>Mark

Welcome

Brynden

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
pn0ymahalAug-08-02 07:38 AM
Donating 2GNT member
2621 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#28489, "RE: questions before I install 440's and AFC.."
In response to Reply # 1




          

ok .. if you got the time put your super afc on, and just set the basic info for the car to run normal! dont tune it yet.. wait till you get your egt installed and new o2 sensor put in to start tuning and installing your bigger injectors... cool



Michael 99gs
HRC Stage 2
http://www.dreamwater.net/purplebeast

Michael
99gs hrc stage 5000 SOLD...
2004 Honda Accord V6 (240 hp)stock
what other car should i buy?? hmmm
Car info & pictures at http://www.cardomain.com/memberpage/520269

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Turbo/Nitrous Tech topic #28487 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.065 seconds, executing 18 queries.