Is the gasket that goes in-between the s16g and the HRC down pipe a mitsu part? If it is does anyone have the part #?

I know I can order it from HRC but I just want to see if it is a mitsubishi part because the local dealership might have one.

Thanks

well you could always get the O2 housing and all gasket...cut it off...whatever works....I need the same gasket...i was goinf to try a 14b gasket...



Life is a bitch. Slap it around a little.

TURBO-HRC stage 1 Moddified

Howell Bottom end in room. Waiting to be unleashed.



email me at Anthonyl469@aol.com




"When you reach real ability you will be able to become one with the enemy. Entering his heart you will see that he is not your enemy after all." -Tjusii

1998 Integra Type R #0072

Take off the gasket and take it to a real parts store (NAPA, speed shop, etc. -not autozone). They should be able to match it up with an off-the-shelf collector gasket. They're usually made a little tougher too. Just don't tell 'em what it's for or then they try and look stuff up.

Greg

'19 Genesis G70 3.3t AWD
'88 Chrysler Conquest TSI

Don't think you can get it from a dealership, but you can get it from HRC.

Super Turbo Turbine Outlet Gasket H TZ-9125

http://www.hrchahnracecraft.com/hahn/parts/install.htm


http://www.geocities.com/turbo99gs

yeah, its a collector gasket with a 2" opening. you can get them from hahn for 5 bucks a piece, or you might be able to get them through summit or jegs for cheaper. autozone or pepboys(or your local automotive parts store) might carry them as well.

ttyl

Matt
Exile Racing Technologies

You can walk into any autozone and pick up 2'' collector gaskets, pro-series that holds up better for high heat, 2 in a pack for 4 bucks, I piggy-back them and they last for a long time, until you loose a damn bolt off the dp which always happens, hehe.

what about the star gasket?