|
Well when i installed my stage 1 HRC kit, i wasnt completly blown away at the power or anything. Yes, it was much faster, but dont expect to be pushed back like a motha with only 5 psi non IC'd. Of course, my FPR was fucked when i installed my kit, so. Now my fuel pressures are better(still way rich), and i have the side mount IC, and running between 7 and 8 PSI. Now THAT feels damn good. BIG difference from the 5 psi non IC'd. Like said above, if you can smell raw fuel, then i'd bet there is a leak somewhere. If you are running really rich, at wot, you should notice a lot of black smoke coming out the exaust, if not, then your not horribly rich, at least not enough to make you loose lots of power. Get your self an A/F guage or monitor your o2 sensor voltage with a voltmeter at wot, to see where you are at. An EGT gauge might be helpful too. If you are using the FMU that came with the kit, you *should* have the proper disk/spring already in there. No need to adjust anything..
 13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
|