|
Well i had enough with my fuel pressure problems, and decided, what the hell...Took it out, and disassembled it. Man, that thing does have cheap looking parts, esp the diaphrams. They were in pretty crappy looking shape, at least it looked like they were anyway. Parts of it were stiff, while others were softer. I found an oil like substance on the thin metal reed valve inside there, so i cleaned that off. I used carb cleaner on that, then i used the cleaner on the diaphrams, soaked them really good, and sprayed off any residue to get them nice and clean. Put it all back together, then reinstalled it. PRESTO!! My boosted pressure reaches about 90 psi @ 5 pounds of boost, which is much better than the 130+ psi i was getting before. Of course now, my idle static pressure is not steady now I had to adjust it many times, and is finally holding somewhat at 50 psi. Man, the car pulls so much better now, but i still can feel some fluctuation on the pressure, the car sometimes pulls hard, sometimes bogs just ever so slightly, loosing a little power it seems..Hopefully this will hold for a week or so until i recieve the Vortech S-FMU. What the hell was HRC thinking of using a such a crappy FPR for their kits? Seems like they do well for about a year of use, then they get out of whack..Well, at least its much better for now! Thanks for the help from you guys 
 13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
|