Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 2 Users in Chat
Top 2GNT Technical Turbo/Nitrous Tech topic #23233
View in linear mode

Subject: "OIL PRESSURE PROBLEM" Previous topic | Next topic
WHITE95RSTMay-28-02 03:19 AM
Member since May 28th 2002
3 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#23233, "OIL PRESSURE PROBLEM"


          

I HAVE A 95 RS TURBO WITH A CUSTOM STAR KIT I HAVE A OIL LEAK THAT I CANT FIND BUT THATS NOT THE BIGGY BEFORE I GOT THE LEAK I HAD TO MUCH OIL PRESSURE I PUT OIL IN UP TO THE HALF MARK ON THE DIP STICK AND IT WOULD BLOW OIL OUT OF MY BREATHER WELL I FIX IT BY ADDING A CATCH CAN BUT IT FILLED IT UP SO I JUST DUMPED IT AND ADDED MORE EACH TIME I GOT LOW NOW IT STARTED BLOWING SEALS LIKE THE VALVE COVER SEAL AND FILLED MY PLUG WELLS SO I REPLACED THAT NOW ITS LEAKING SOME WHERE HIGH BEHIND THE ENGINE I THINK MAYBE A HEAD GASKET CAUSE IM BLOWING WHITE OUT THE EXHAUST EVERY NOW AND THEN UNSURE WHERE THE LEAK IS ITS COVERING THE ALTERNATOR AND THE RIGHT SIDE OF THE CAR MAINLY LOOKS LIKE MAYBE UP NEAR THE TIMING COVER STILL UNSURE AT THIS POINT ALSO WOULD LIKE TO KNOW WHY THE MANIFOLD PRESSURES SO HIGH AND ITS FORCING THE OIL OUT OF THE BREATHER THANKS FOR THE HELP


95 RST

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

Teamdougie2May-28-02 03:40 AM
Old School 2GNTer
2982 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#23234, "RE: OIL PRESSURE PROBLEM"
In response to Reply # 0




          

First of all... welcome to the forums!

Second of all... I'm not even going to attempt to read your message because it's all uppercase and one big run on sentence. I'm not being an ass about it but it hurts my eyes!



Doug

Xtreme Performance Services

Race Engines 路 Transmissions 路 Turbo Systems 路 EFI & Tuning 路 Fabrication 路 Welding
www.xtremefabrications.com

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
Fast420AMay-28-02 04:01 AM
Old School 2GNTer
4370 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#23235, "RE: OIL PRESSURE PROBLEM"
In response to Reply # 1


          

Okay welcome to the forums, and yes PLEASE turn off the caps lock. emoji




Okay, oil problem. First RUN A COMPRESSION TEST. See where you stand as far as the compression in all four cylenders, this will help you start finding the problem.

Here's a walkthru on doing a compression test on the 420A. Good luck and post the results here so we can figure out the problem.

http://www.2gnt.com/www/corbin/comp.html






________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com


Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
Global Ruler Of All ThingsDarkOneMay-28-02 06:16 AM
Donating 2GNT member
14955 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#23236, "RE: OIL PRESSURE PROBLEM"
In response to Reply # 2




          

I THINK YOU HAVE A CRACKED PISTON THAT IS ALLOWING BOOST TO COME INTO YOUR CRANKCASE WHICH IS PRESSURIZING IT AND BLOWING ALL YER SHIT OUT. I THINK CAPS LOCK IS REALLY ANNOYING AND I'M REALLY NOT TRYING TO BE RUDE BUT I LIKE MESSING WITH THE NEWBIES SOMETIMES.

Hheh .. Anyway.

Do a compression test, because i am willing to be you are going to be low on one cylinder. You have all the sympotoms of a pressurized crankcase, which is usually caused by a cracked ringland. Does it sound off at idle, like it has a slight miss? Does it smoke when you get on it?

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
Dave_FLMay-28-02 08:15 AM
Old School 2GNTer
3317 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#23237, "RE: OIL PRESSURE PROBLEM"
In response to Reply # 3




          

Add another blown 420a to the list. Looks like many people are blowing their engines. I guess its about right though becuase many people have had their turbos on for a year or more and after that somwthing usually gives.

Dave
05 Ford F150 SuperCrew FX4

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Turbo/Nitrous Tech topic #23233 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.075 seconds, executing 22 queries.