Well... Anyone been doing some snappin' lately? I really hope not!
It is inevitable that at some point most of us Turbocharged 420As need to look for better axles, and probably some sort of Limited slip system.
As far as I know, only Quaife makes a Limited Slip Differential for us.
Q: I know that a LSD is good for drag racing, and AutoCrossing, but how does it do in wet weather? Rumour has it, that exiting from corners (with a touch of the gas pedal) makes your car go sideways....
I have just seen the ad for this company called The Driveshaft Shop - http://www.driveshaftshop.com/ These guys claim that they made the axles for Len Ayala.. So they do have some cred.
Q: Are Neon Axles 100% compatible/interchangeable for FWD 420A DSMs?
CNNP Racing also claims that they can make custom ones for us (Could they be the same ones from The Driveshaft Shop...?)
Q: Does anyone make equal-length halfshafts for our cars? Or is that not even applicable for us?
Thanks,
Guy RS_Guy
13.9sec @ 105mph passes w/ Blown piston rings, on Stock Internals at 10psi Boost....
#2196, "RE: Axles & LSD - To Snap or Not To Snap?" In response to Reply # 4
i went to honda to get a cv joint for my 91 civic SI (dont laugh it'll take a corner like you wouldnt belive) and the guy at the parts counter told me to go to the Partsource store (canadian autoparts store dont know if you have them in the states) and buy a reman one because it came with a lifetime warrenty. also if you cant find anything you could always try cryo treating the stockones
#2197, "RE: Axles & LSD - To Snap or Not To Snap?" In response to Reply # 5
I'm from Canada...do you have a url for that store? Or is it only found where you are?
>i went to honda to get >a cv joint for my >91 civic SI (dont laugh >it'll take a corner like >you wouldnt belive) and the >guy at the parts counter >told me to go to >the Partsource store (canadian autoparts >store dont know if you >have them in the states) >and buy a reman one >because it came with a >lifetime warrenty. also if you >cant find anything you could >always try cryo treating the >stockones
#2198, "RE: Axles & LSD - To Snap or Not To Snap?" In response to Reply # 6
im from ontario and the store is called "the partsource" its just a big autoparts store, they sell the same stuff as Canadian tire (i think they are the same company) only they have more stuff in stock than crappy tire
#2199, "RE: Axles & LSD - To Snap or Not To Snap?" In response to Reply # 0
LAST EDITED ON 01-Mar-01 AT 06:31 AM (PST)
Until recently, I didn't know what Cryogenics was, but when I heard about it, I did some research, and also by pure chance, we studyied it in my Manufacturing class.
Cryogenics makes a metal MUCH harder by aligning all the crystals, however, it also makes the metal much more brittle, which means that, it will flex LESS than stock and break instead. That is the same reason I didn't have my rods Cryogenically treated.
The driveshaft shop axles seem to be able to flex by 7 degrees...
And as for warranties, well what concerncs me the most is that if I DO break an axle (even if its replacement is free), what happens to all the stuff around the axle???
Guy RS_Guy
13.9sec @ 105mph passes w/ Blown piston rings, on Stock Internals at 10psi Boost....
#2200, "RE: Axles & LSD - To Snap or Not To Snap?" In response to Reply # 8
One thing to remember, i believe HRC's Eclipse is running 500HP on stock axles... i don't think they've broken one yet.
-DarkOne I'm so bad, i should be in detention.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
have you seen what can happen to axles when they sticky up a weak traction track. I've SEEN a 1G GSX waste 3 axles as well as a Couple of Intergras. At the July 8 RRE Meet I talking to a national challenger who destroyed his front 2 from his 2G GSX. After they applied the stuff he was simply diving and heard the lil' crackling from the stuff
Skrilla '97 Base Talon NA "Technology: The Only Replacement for Displacement" "Peace and Turbo Grease"
*Skrilla "Honest officer, I thought you were trying to race me" Talon: 1st 2.4L '97 Prelude '04 350Z
Originally posted by YourInMyMirror95GS dick teaser's should be rounded up and shot in the forehead
Originally posted by etx Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon!
Originally posted by Dark0ne Thanks. Now excuse me while i fuck your sister.
#2202, "RE: True but..." In response to Reply # 10
LAST EDITED ON 02-Mar-01 AT 02:59 AM (PST)
I have seen a broken axle caused by a 420A avenger with only intake/exhaust and way too much traction (quaife/bushings/mounts - everything) launched at 5000rpm on a sticky track. It happens.. My main advice is to take it a little easier on the launch and you should be ok.
#2203, "RE: True but..." In response to Reply # 11
Thats why slicks make it much more likely to break axles, traction combined with hard launhes is what does it and why my axles have 137K miles even with abuse (I hope someone has spares at the DSM shootout cause someones bound to break axles sooner or later). The driveshaft shop has several stages of axles so I dont think all of them cost $800ish (too damn much for my blood).
Search
Printer-friendly copy
1 User in Chat
It happens.. My main advice is to take it a little easier on the launch and you should be ok.
