is it posible to make a stage 1 hrc turbo kit run on 3 or 4 psi case iam going to get the dule boost cont.and was wondering if i can daily drive at a low 3 or 4psi ad when i race hit the switch and it jumps to5 or 6 for now iam going to go stage 2 in a wile
#21672, "RE: make my boost to 3psi?????" In response to Reply # 1
>adjustment of the gas pedal usually works.
Yeah, unless you add an intercooler to the stage 1, you cant go any lower than the wastegate spring, which is 5 psi. By adding the intercooler, you will drop a few psi..but like said above, just dont mash the gas, and you won't get full boost
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
#21673, "RE: make my boost to 3psi?????" In response to Reply # 2
You can cut the actuator arm in half and add a double sided nut and "leagthen" the arm. That will lower your boost. That is what I did to my T25. Also a few honda guys have done it to lower the stock boost on the t25(12-15psi). Check out www.homemadeturbo.com lots of hack information on turbocharging.
Search
Printer-friendly copy
0 Users in Chat
