is it posible to make a stage 1 hrc turbo kit run on 3 or 4 psi case iam going to get the dule boost cont.and was wondering if i can daily drive at a low 3 or 4psi ad when i race hit the switch and it jumps to5 or 6 for now iam going to go stage 2 in a wile

adjustment of the gas pedal usually works.

>adjustment of the gas pedal usually works.


Yeah, unless you add an intercooler to the stage 1, you cant go any lower than the wastegate spring, which is 5 psi. By adding the intercooler, you will drop a few psi..but like said above, just dont mash the gas, and you won't get full boost

You can cut the actuator arm in half and add a double sided nut and "leagthen" the arm. That will lower your boost. That is what I did to my T25. Also a few honda guys have done it to lower the stock boost on the t25(12-15psi). Check out www.homemadeturbo.com lots of hack information on turbocharging.