is it ever necessary to clean the inside of our hahn fmic? and if so how do we do it, because it is a pain in the ass to take off.
lates
james

Rest In Peace Heidi Doggy

i have heard that u can run gasoline thru it, and clean it out..

i got a ? for u... wats up w/your spark plug wires?? looks crazy on your sig pic...

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki

I had the same question. What's with the wires?

Dave
05 Ford F150 SuperCrew FX4

You shouldn't have to clean the fmic very often, unless you know oil has gotten in there, or if you run the breather filter line back to the intake pipe. But, if you have to clean it, a lot of people use gasoline. Just pour it in there and just shake the i/c around a bit. Just be careful where you do this. Or, you could use paint thinner. It should work just as well, and not as flammable as gasoline.

___________
Kon C

"Sometimes, a man has to do what a man has to do."

hehe the wires on james car are the nology... if i just saw that i would give him a ticket =)hehe


Michael 99gs
Boost It!
Mods:
no time to put in yet:315cc injectors.
Hrc Stage 2
S-FMU
Crane HI-6DI2
Greddy Type S Bov
VC-2
Road Race Catch Can
Greddy Profec B & Switch
Apexi WS Catback
Super Afc
Autometer Boost,
Egt,Tranny Temp Gauge & Cooler
Air/Fuel Light & Digital
Tokico Adjust Struts
Eibach Pro Kit Springs
Front & Rear Upper Bar
CarCraft Interior
Sound System= Bring it On

Michael
99gs hrc stage 5000 SOLD...
2004 Honda Accord V6 (240 hp)stock
what other car should i buy?? hmmm
Car info & pictures at http://www.cardomain.com/memberpage/520269

I just had to do a big cleaning of my FMIC there was about 1/2 quart of oil in it. I used B-12, just spray it in the IC shake it up and let it drain. Do this until the B-12 comes out clear. Plus the B-12 dries from the air very quicky. It worked great for me and now I have a catchcan so that should solve that problem.
Patrick

Patrick
96 GS
13.54 @ 106.94 mph on 15psi 21 May.04
HRC kit, S20G, FMIC, Howell bottom end 8.6 pistons, S-FMU, Blitz BOV, P&P head, SS valves, lots more little goodies

those spark plug wires are NOLOGY wires, they just have a thermo-tec heat shielding on them.
lates
james

Rest In Peace Heidi Doggy

James, arent you runnign a catch can? How else would oil get into the FMIC...unless blown turbo oil seal.

I would just run gasoline through it, then mild compressed air to blow it out. top to bottom of course.

-K-

i don't have any oil in it, i was just wondering what people do to clean it out.
lates
james

Rest In Peace Heidi Doggy

i can't help you with your question, but i do have one for you, where can i find chrome parts for my turbo...kinda like your heat sheild?

thanks

i made the heat shield. it is made of highly polished 6061-T6 aluminum with 3 layers of thermo-tec insulation riveted to the inside. it looks good and works good!
lates
james

Rest In Peace Heidi Doggy

so what your saying is that i can't get one...

where you located?

Rest In Peace Heidi Doggy

chicago...where you at?

Los angeles, maybe i could go into production, i have had several people ask me about it since i put the picture in my signature
lates
james

Rest In Peace Heidi Doggy

You will need to remove the ic to clean it good. I used acetone. It comes in a gallon from any local auto parts store. I dumped the whole thing in my ic and then drained it. The acetone (kinda like nail polish remover) Then dries quickly, reassemble and your done. late mike

stage BIG custom mj racing turbo set up, built block.worked head,all tial components, hks evcez,spearco 992,oh yeah and a huge bottle in the trunk last run all turbo 13.8@108 no nos dyno'd at AEBS in Cali with 300+ hp to the wheels

sure, if you were to it tho, i would want a peice to cover the mainfold also

i'm working on that, i am trying to design a reliable fastening system, but i just have had no time lately
lates
james

Rest In Peace Heidi Doggy

James, I bet you could make some $$$ if you made some of those heat shields up and sold them on here... cause we're all too damn lazy to fabricate our own.. I have made some in the past but yours looks better and I didnt have heat padding on it. but on the ic thing do as they say if you ever have to do it. I used paint thinner, gas, degreaser, etc... did it a bunch of times, plugged up one side, filled it full, let it sit for awhile, swish it around, emty it out, do a few more times, and clean as a whistle.

James, I encourage you to try going into production on the heat shield. I think you could get more then a few buyers since we all know how easily the turbo manifold turns brown on HRC's turbo (no offense hrc, it's the truth!).

Whenever you have some free time, you should post up a group buy and have a target number of people. I bet your order could be filled really quickly.

I'd definately be one of the first to invest in one. =)

16.1 @ 87.11
http://www.virtuallyinfamous.com

ARD 57mm tb and p&p manifold, Neuspeed STB, Pro-kits, Illuminas, Injen CAI with K&N, 2.5" pacesetter catback,
AF/X UDP, Rear STB, Powerslot rotors, RRE SS Brakelines.

have your manifold ceramic coated, I had mine done when I got it, and it has taken quite a bit of abuse and still no rusty.

hey james, i like your shield better then mine and hook me up to hehe...


Michael 99gs
Boost It!
Mods:
no time to put in yet:315cc injectors.
Hrc Stage 2
S-FMU
Crane HI-6DI2
Greddy Type S Bov
VC-2
Road Race Catch Can
Greddy Profec B & Switch
Apexi WS Catback
Super Afc
Autometer Boost,
Egt,Tranny Temp Gauge & Cooler
Air/Fuel Light & Digital
Tokico Adjust Struts
Eibach Pro Kit Springs
Front & Rear Upper Bar
CarCraft Interior
Sound System= Bring it On

Michael
99gs hrc stage 5000 SOLD...
2004 Honda Accord V6 (240 hp)stock
what other car should i buy?? hmmm
Car info & pictures at http://www.cardomain.com/memberpage/520269