Ok I tried the search but with no sucsess. I need to know what wire to tap into for the speed sensor wire on the turbo timer. TIA

03 350Z
19"Volk GT-S, Greddy Twin Turbo, Greddy Exhaust
96 GS MT
S16g, Portfueler
Howell 2.2 Stroker

Bump

03 350Z
19"Volk GT-S, Greddy Twin Turbo, Greddy Exhaust
96 GS MT
S16g, Portfueler
Howell 2.2 Stroker

i never installed the speed wire option or the ebrake option, i'm lazy. either way, the TT works w/ the rpm's automatically, you just have to set it when you install it and it'll work great. then all you do is set low and high positions and that'll be the minimum time it counts from, but when you rev the time goes up, and when you stop reving the time goes down (but not past the set time). works great. what's the speed wire do anyways?

-bryan
'98 rst

Pin#5 on white 18 pin connector behind radio. yellow wire with white stripe (close to center of connector on top row....row closest to the clip)

A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on............

A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on...........