| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | Greddy Turbo Timer Speed Wire Search not Working | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=20338 |
20338, Greddy Turbo Timer Speed Wire Search not Working
Posted by pearlwhite2gnt, Apr-22-02 05:24 PM
Ok I tried the search but with no sucsess. I need to know what wire to tap into for the speed sensor wire on the turbo timer. TIA
:thumbsup
|
20339, RE: Greddy Turbo Timer Speed Wire Search not Working
Posted by pearlwhite2gnt, Apr-23-02 09:58 AM
Bump
:thumbsup
|
20340, RE: Greddy Turbo Timer Speed Wire Search not Working
Posted by mitseclps, Apr-23-02 03:56 PM
i never installed the speed wire option or the ebrake option, i'm lazy. either way, the TT works w/ the rpm's automatically, you just have to set it when you install it and it'll work great. then all you do is set low and high positions and that'll be the minimum time it counts from, but when you rev the time goes up, and when you stop reving the time goes down (but not past the set time). works great. what's the speed wire do anyways?
|
20341, RE: Greddy Turbo Timer Speed Wire Search not Working
Posted by Avenger EST, Apr-23-02 04:27 PM
Pin#5 on white 18 pin connector behind radio. yellow wire with white stripe (close to center of connector on top row....row closest to the clip)
A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on............
| |