Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 0 Users in Chat
Top 2GNT Technical Turbo/Nitrous Tech topic #19985
View in linear mode

Subject: "which injectors should i use with 10-15psi" Previous topic | Next topic
ecl98pseApr-18-02 01:17 AM
Member since Jan 28th 2002
573 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#19985, "which injectors should i use with 10-15psi"


          

Not sure how to figure out wich injector would work best. any suggestions appreciated...BTW i plan on SAFC

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

dsmarkApr-18-02 02:26 AM
Old School 2GNTer
142 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#19986, "RE: which injectors should i use with 10-15psi"
In response to Reply # 0

          

i'm sure 440's would be fine with an afc...but check corbin's page on calculating your injector size.

mark



stage 2 turbo and all that crap

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
ecl98pseApr-18-02 02:38 AM
Member since Jan 28th 2002
573 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#19987, "RE: which injectors should i use with 10-15psi"
In response to Reply # 1

          

would i have to change the FPR disc if i get an SAFC?
also what hp range would 15psi be?

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
pn0ymahalApr-18-02 09:22 AM
Donating 2GNT member
2621 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#19988, "RE: which injectors should i use with 10-15psi"
In response to Reply # 2



          

go to corbin site it will give you the low down on what you need. you would need a adjustable fpr lower cab disk and a afc to lean it out to idle etc. 440cc should be good for 15psi

Michael 99gs
Boost It!
Mods:
no time to put in yet:315cc injectors, & crane ignition.
Hrc Stage 2
S-FMU
Greddy Type S Bov
VC-2
Road Race Catch Can
Greddy Profec B & Switch
Apexi WS Catback
Super Afc
Autometer Boost,
Egt,Tranny Temp Gauge & Cooler
Air/Fuel Light & Digital
Tokico Adjust Struts
Eibach Pro Kit Springs
Front & Rear Upper Bar
CarCraft Interior
Sound System= Bring it On

Michael
99gs hrc stage 5000 SOLD...
2004 Honda Accord V6 (240 hp)stock
what other car should i buy?? hmmm
Car info & pictures at http://www.cardomain.com/memberpage/520269

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
ajApr-20-02 07:14 AM
Old School 2GNTer
280 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#19989, "RE: which injectors should i use with 10-15psi"
In response to Reply # 3

          

w/ an afc,440's should be best for drivability and ample enough to handle 15 PSI(or slightly more w/ proper tuning and some retard).Would be a good idea to get an adjustable FPR but if you have the regular fmu,4:1 disk works fine and is a cheper approach.If you got enough bones then go w/ the dfi w/ 650's.

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Turbo/Nitrous Tech topic #19985 Previous topic | Next topic
   

Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.059 seconds, executing 22 queries.