| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | which injectors should i use with 10-15psi |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=19985 |
19985, which injectors should i use with 10-15psi
Posted by ecl98pse, Apr-18-02 01:17 AM
Not sure how to figure out wich injector would work best. any suggestions appreciated...BTW i plan on SAFC
|
19986, RE: which injectors should i use with 10-15psi
Posted by dsmark, Apr-18-02 02:26 AM
i'm sure 440's would be fine with an afc...but check corbin's page on calculating your injector size.
mark
|
19987, RE: which injectors should i use with 10-15psi
Posted by ecl98pse, Apr-18-02 02:38 AM
would i have to change the FPR disc if i get an SAFC?
also what hp range would 15psi be?
|
19988, RE: which injectors should i use with 10-15psi
Posted by pn0ymahal, Apr-18-02 09:22 AM
go to corbin site it will give you the low down on what you need. you would need a adjustable fpr lower cab disk and a afc to lean it out to idle etc. 440cc should be good for 15psi
Michael 99gs
Boost It!
Mods:
no time to put in yet:315cc injectors, & crane ignition.
Hrc Stage 2
S-FMU
Greddy Type S Bov
VC-2
Road Race Catch Can
Greddy Profec B & Switch
Apexi WS Catback
Super Afc
Autometer Boost,
Egt,Tranny Temp Gauge & Cooler
Air/Fuel Light & Digital
Tokico Adjust Struts
Eibach Pro Kit Springs
Front & Rear Upper Bar
CarCraft Interior
Sound System= Bring it On
|
19989, RE: which injectors should i use with 10-15psi
Posted by aj, Apr-20-02 07:14 AM
w/ an afc,440's should be best for drivability and ample enough to handle 15 PSI(or slightly more w/ proper tuning and some retard).Would be a good idea to get an adjustable FPR but if you have the regular fmu,4:1 disk works fine and is a cheper approach.If you got enough bones then go w/ the dfi w/ 650's.
|