If anyone is interested in new injectors to go with their Super AFC (like I am) then I may have a good way to save some money. Just found out that the 2Gen RX-7 Non Turbo's came with 460cc injectors. If you found a Turbo model, they come with 550cc injectors which are good upto about 420hp. Hell, the 1Gen RX-7's came with 680cc injectors. All this info is coming from different automotive sites...

FYI, the MK3 Supra ('86.5 to '92) turbo came with 440cc injectors.

All these vehicles can be found at almost evry decent junkyard. I/m sure someone could "pocket" these and not pay more than a couple bucks (to cover admission) for a "new" set of infectors.

I don't know how well this will work or if it is even worth it. Why doesn't everyone add what you think about this...

DoN
'99 GS Sports Edition
Star Stage 2, CFDF Clutch
Greddy Manual Boost Controller
Greddy BOV and EVO Exhaust
Greddy TT and shift knob
AF/X Underdrive Pulley
AEM Big Brake Kit
B&M Edge Short Shifter
Eibach Sportlines with Tokiko Blues

'99 Eclipse GS Sports Edition
Star Stage 2
Greddy EVO Exhuast
AEM Big Brakes
Greddy Type S BOV
Pioneer DEH-P7200
Bazooka EL1500 running 2 MTX 10" Subs
Fosgate Separates throughout

Yes, I'm in a market for larger injectors soon since I paid for my SAFC...

If those injectors are the saturated kind (if it will work for our vehicle) then why not use them?!?! Then it would be a good deal to get!!



l e o n

LAST EDITED ON 23-Feb-01 AT 11:30 AM (PST)

Isn't the saturated variety an American type of injector.

The peak and hold which are incompatible are Asian injectors. Many of the cars you have mentioned are Asian, thereby deducing that they come with peak and hold. OF course, this is all specualtion. Anyhow, maybe we should look into some Ford Mustangs or something for some bigger saturated injectors??

Great idea! btw...

Jason
98' Eagle Talon ESi-T
Mitsu Super 16g Turbo(HRC)


http://springfielddsm.homestead.com/JasonsPics.html

_____________________________________
Jason ESi-T

04' BMW 325Ci
91' Nissan 240SX
98' Eagle Talon ESi (sold)

The difference between injectors types is hi resistance (peak and hold) and low resistance (saturated). As long as you run with a S-AFC from what I understand, it can control both types.

Correct me if I'm wrong.

DoN

BTW Leon, the link for the reading of EGTs is below:

http://www.turbosystem.com/Hahn_Automotive/Tech_Information/tech_information.html


'99 GS Sports Edition
Star Stage 2, CFDF Clutch
Greddy Manual Boost Controller
Greddy BOV and EVO Exhaust
Greddy TT and shift knob
AF/X Underdrive Pulley
AEM Big Brake Kit
B&M Edge Short Shifter
Eibach Sportlines with Tokiko Blues

'99 Eclipse GS Sports Edition
Star Stage 2
Greddy EVO Exhuast
AEM Big Brakes
Greddy Type S BOV
Pioneer DEH-P7200
Bazooka EL1500 running 2 MTX 10" Subs
Fosgate Separates throughout

Take a look here:
http://www.google.com/search?q=cache:www.supras.com/~riemer/sonictech/fuel_injectors/RCtech.html+supra%2Binjectors%2Bpeak&hl=en


It says that saturated injectors CAN be found in Japanese cars too...so if we are able to find saturated injectors with the correct o ring type, then we are in business???



l e o n

> Anyhow, maybe we should look into some Ford Mustangs or something for some bigger saturated injectors??

I was looking in the newest Summit racing catalog ang they have a set of Ford Racing injectors for the Mustang that flow 30lb/hr for 219.95 for a set of 8. That comes to $27.50 per injector. 2 people could go into a joint purchase and share the cost... much cheaper than RCEngineering and they are brand new. Only thing is that I have no idea what 30lb/hr equates to cc wise (a measurement I am familiar with).

DoN
'99 GS Sports Edition
Star Stage 2, CFDF Clutch
Greddy Manual Boost Controller
Greddy BOV and EVO Exhaust
Greddy TT and shift knob
AF/X Underdrive Pulley
AEM Big Brake Kit
B&M Edge Short Shifter
Eibach Sportlines with Tokiko Blues

'99 Eclipse GS Sports Edition
Star Stage 2
Greddy EVO Exhuast
AEM Big Brakes
Greddy Type S BOV
Pioneer DEH-P7200
Bazooka EL1500 running 2 MTX 10" Subs
Fosgate Separates throughout

30lb/hr is

30 lb/hr * 10.50 = 315 cc / min


HMMMM...


l e o n

If they are 315cc injectors, the stock ECU should be able to control the Ford Injectors... that's a big question though for me since I don't know for sure if our stock ECU can handle an injector larger than the stock 234cc's...

Maybe someone could enlighten me... PLEASE!!!!

DoN
'99 GS Sports Edition
Star Stage 2, CFDF Clutch
Greddy Manual Boost Controller
Greddy BOV and EVO Exhaust
Greddy TT and shift knob
AF/X Underdrive Pulley
AEM Big Brake Kit
B&M Edge Short Shifter
Eibach Sportlines with Tokiko Blues

'99 Eclipse GS Sports Edition
Star Stage 2
Greddy EVO Exhuast
AEM Big Brakes
Greddy Type S BOV
Pioneer DEH-P7200
Bazooka EL1500 running 2 MTX 10" Subs
Fosgate Separates throughout

I just wanna know if we can use stock injectors from other types of vehicles???????????




l e o n

What about using injectors from a turbo mopar???

http://members.nbci.com/minimopar/perf/fuel.html



l e o n

Here's a list of some injectors and it's flow rates...

http://www.autospeed.com/A_0102/P_1/article.html



l e o n

Since you are trying to save money and use other car injectors, let me save you the trouble. Look under the hood of a GM. Mine are from a LT1 corvette....

Something else to keep in mind, factory injectors on V-8 engines are small. They do have 8 of them after all. It is not as necessary to use large injectors.

Oh, you will run into lbs/hr instead of cc's when looking so it is essential to know how to convert. simple. x-lbs/hr*10.5=y

MuRiX
97 Eclipse GS HRC Stage II
And a whole lot of other mods...
89 Accord LSi - yes it's mine
http://murix.home.icq.com/index.html

05 Mazda RX-8
06 Lotus Elise

Any GM will do? SInce our engines is Chrysler, that means it uses American style o-ring? What about spray pattern???

Oh how much did you pay for your LT1 injectors?


l e o n