I am going to be running 440 accel injectors, s afc, and a S FMU. About what is the max boost that i will be able to run with this fuel setup??
I have read Corbin's page but not very carefully. Also what kind of power can I expect out of that and the howell bottom end, some port work on the head, and new valve job?? I also have the N1 exhaust, test pipe , CM stage 4, and other little things here and there..
Thanks
Mark Dollar Stage 3-4 Turbo See my White Avenger @ WWW.Armond30.com
#19204, "RE: Question about 440 injectors??" In response to Reply # 0
I am going the same setup as you. I calculated with corbin's formula that my goal boost pressure would be 15psi, at about 290fwhp, with a 3:1 SFMU disk.
_________________ Vinnie Lima kiku@asog.net AIM: Kiku888 1997 Chrysler Sebring "Silver XTC" I4 420a w/ HRC Stage 2.45 w/ FMIC 14.7@97 mph@6psi Proud member of the ASOG BoOsT JuNkIe Crew
_________________ Vinnie Lima vlima@csc.com AIM: Kiku888 1997 Chrysler Sebring "Silver XTC" I4 420a w/ HRC Stage 2.45 w/ FMIC 14.7@97 mph@6psi Proud member of the ASOG BoOsT JuNkIe Crew
#19205, "RE: Question about 440 injectors??" In response to Reply # 1
@15psi, you should be well above 290 fwhp from what I've calculated. On avg, I've seen 300 fwhp at about 12psi. (unless you're using fwhp to mean "front wheel"hp. I was thinking flywheel when I wrote this. I think you'd get around 290 at the wheels at 15psi...)
To answer 96venger, I think you'll be limited by internals at this point. You'll be able to boost as high as your rods (or rings) can take which is supposed to be around 14-15psi I believe.
>I am going the same setup as you. I calculated with >corbin's formula that my goal boost pressure would be 15psi, >at about 290fwhp, with a 3:1 SFMU disk. > > >_________________ >Vinnie Lima >kiku@asog.net >AIM: Kiku888 >1997 Chrysler Sebring "Silver XTC" >I4 420a w/ HRC Stage 2.45 w/ FMIC >14.7@97 mph@6psi >Proud member of the >ASOG BoOsT JuNkIe Crew
#19206, "RE: Question about 440 injectors??" In response to Reply # 2
I DO have internals. I said that in the first post.
Vinnie that is about where I want to be around 300 FWHP! I am just worried about what psi the 440's are capable of handling cause if they can handle 16 or 17psi I will try it
Oh yeah I went with the 8.5:1 compression if that makes any difference.
Mark Dollar Stage 3-4 Turbo See my White Avenger @ WWW.Armond30.com
#19210, "RE: Question about 440 injectors??" In response to Reply # 6
Damn i'm dying to hit 15psi!!!!!!!!!
A chrysler sebring coupe running 13s...cant be more surprised that that! lol _________________ Vinnie Lima kiku@asog.net AIM: Kiku888 1997 Chrysler Sebring "Silver XTC" I4 420a w/ HRC Stage 2.45 w/ FMIC 14.7@97 mph@6psi Proud member of the ASOG BoOsT JuNkIe Crew
_________________ Vinnie Lima vlima@csc.com AIM: Kiku888 1997 Chrysler Sebring "Silver XTC" I4 420a w/ HRC Stage 2.45 w/ FMIC 14.7@97 mph@6psi Proud member of the ASOG BoOsT JuNkIe Crew
Search
Printer-friendly copy
1 User in Chat
