How do i run the vc2,,,,do i run it to the mass sensor that runs to the manifold? if i do which color wire do i tap into??? Or do i run into the Ecu itself by which harness to i tap into the top harness or the bottom. Please help me i need the VC2 hooked up because im running lean and i have a road trip ........thanx for everything john


on my vc2 the wires correspond as follows: blue/red wire connects to the Air/Flow sensor Input of ECU,........the solid blue wire connects to the Air/Flow sensor Output of ECU......then i have a negative wire to the battery, and a red wire to the ignition switch...
the last time i tried running into a wire in the mass sensor it made car overheat,probably because it was the wron wire someone please help me,,,,,,,,,,,,,,where is the Air/Flow sensor of the ecu??

Don't double post. or triple, either.

Yellow wire black stripe in the ECU wiring harness. That's the MAP sensor wire.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

thanx dino, my bad noone seems to answer around here