Damn, I accidnetly broken the red lockign tab on my oil sensor while removing it. It still locks in...kinda, should i be at all concern? It is an 97.
Thanx.

kaiser

-K-

I broke mine off while installing my kit. I haven't had any problems. If it still clicks in you should be good.

if it still "sort of locks" I say you just try some of the ever useful ducktape to hold the two together more securely.

-97 GS (First project, 299 whp)(sold)
- 97 RS 2.6 last numbers: 306hp, 352tq @16psi (Dead, parted out)
- 99 GS OZ, Hahn Kit, 56k miles (Sold)
--------
- 00 Nissan Maxima GLE (Daily Driver)
- 02 Audi A4 1.8T Quattro

Another reason everyone should run the earl oil gate and all the lines late mike

stage BIG custom mj racing turbo set up, built block.worked head,all tial components, hks evcez,spearco 992,oh yeah and a huge bottle in the trunk last run all turbo 13.8@108 no nos dyno'd at AEBS in Cali with 300+ hp to the wheels

Parts list?



Eric Madden

the oil gate is earls fuel block #100178 you'll need 2 2ft lines. The reducer from the block to the line,fittings for the block,gate,turbo and plugs. Its easy to figure out once you get the gate. late mike

stage BIG custom mj racing turbo set up, built block.worked head,all tial components, hks evcez,spearco 992,oh yeah and a huge bottle in the trunk last run all turbo 13.8@108 no nos dyno'd at AEBS in Cali with 300+ hp to the wheels

well i suggest you go and buy a new one. mine broke also and i was leakin oil like a mad man. better safe then sorry. bought a new one and now im not worring 24/7 bout leakin oil. only bad thing is that its kinda spensive. for me it was 50 bux. but i think you said stuff is cheaper where you live so you might not pay that much.


"Proud to be, a 2gnt"


-mitsuman

Performance:
1. HRC STG 2
2. Greddy Power Extreme exhaust
3. Blits Super Sound BOV
4. HKS Turbo timer

Ride:
1. motegi mr7 17'' wrapped in yokohama A550v 235/45/17

Sound:
1. sony xplod cdxm620 deck
2. 2 10'' audiobahn subs
3. nice shiny audiobahn amp

In room:
1. blitz front end(thnx 2 eclipse804)
2. H&R sport springs(thnx 2 eclipse804)

Fun mods:
1. "Nozzel mod"

Wanted:
1. to much ish to list... but a boy can dream

-mitsuman 95 GS 5-spd w/97-99 front end
Repin The SoCal 2GNT'ers
mitsuman95@hotmail.com
AIM s/n : mitsuman95gs

for some reason my oil press guage isn't working anymore. i tried the ignition and grounds, those are fine, so it has to be the sending unit or the guage is busted. somehow i doubt it's the gauge. can you buy a replacement sending unit from autometer or someone else? any ideas?

-bryan
'98 rst

Yeah it still locks in a bit. you can feel it while sliding it back on. Kinda like a little click. I'll go under tomorrow to check it out, and maybe apply the duct tape method.. oh so ghetto.

speaking of ghetto, the return line was too long, so i just looped it literally...I'll work on posting some pics.

kaiser

-K-