| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Oil sender unit... |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=17708 |
17708, Oil sender unit... Posted by eclipsekaiser, Mar-14-02 06:26 AM
Damn, I accidnetly broken the red lockign tab on my oil sensor while removing it. It still locks in...kinda, should i be at all concern? It is an 97. Thanx.
kaiser
|
17709, RE: Oil sender unit... Posted by JustOne, Mar-14-02 06:50 AM
I broke mine off while installing my kit. I haven't had any problems. If it still clicks in you should be good.
|
17710, RE: Oil sender unit... Posted by whodatt1, Mar-14-02 06:57 AM
if it still "sort of locks" I say you just try some of the ever useful ducktape to hold the two together more securely. :)
|
17711, RE: Oil sender unit... Posted by rpm97talon, Mar-14-02 07:26 AM
Another reason everyone should run the earl oil gate and all the lines late mike
|
17712, RE: Oil sender unit... Posted by 99GS, Mar-14-02 08:41 AM
Parts list?

Eric Madden
|
17713, RE: Oil sender unit... Posted by rpm97talon, Mar-14-02 08:48 AM
the oil gate is earls fuel block #100178 you'll need 2 2ft lines. The reducer from the block to the line,fittings for the block,gate,turbo and plugs. Its easy to figure out once you get the gate. late mike
|
17714, RE: Oil sender unit... Posted by mitsuman, Mar-14-02 09:58 AM
well i suggest you go and buy a new one. mine broke also and i was leakin oil like a mad man. better safe then sorry. bought a new one and now im not worring 24/7 bout leakin oil. only bad thing is that its kinda spensive. for me it was 50 bux. but i think you said stuff is cheaper where you live so you might not pay that much.
"Proud to be, a 2gnt"

-mitsuman
Performance: 1. HRC STG 2 2. Greddy Power Extreme exhaust 3. Blits Super Sound BOV 4. HKS Turbo timer
Ride: 1. motegi mr7 17'' wrapped in yokohama A550v 235/45/17
Sound: 1. sony xplod cdxm620 deck 2. 2 10'' audiobahn subs 3. nice shiny audiobahn amp
In room: 1. blitz front end(thnx 2 eclipse804) 2. H&R sport springs(thnx 2 eclipse804)
Fun mods: 1. "Nozzel mod" :)
Wanted: 1. to much ish to list... but a boy can dream :)
|
17715, RE: Oil sender unit... Posted by mitseclps, Mar-14-02 10:08 AM
for some reason my oil press guage isn't working anymore. i tried the ignition and grounds, those are fine, so it has to be the sending unit or the guage is busted. somehow i doubt it's the gauge. can you buy a replacement sending unit from autometer or someone else? any ideas?
|
17716, RE: Oil sender unit... Posted by eclipsekaiser, Mar-14-02 07:36 PM
Yeah it still locks in a bit. you can feel it while sliding it back on. Kinda like a little click. I'll go under tomorrow to check it out, and maybe apply the duct tape method...:P oh so ghetto.
speaking of ghetto, the return line was too long, so i just looped it literally...I'll work on posting some pics.
kaiser
|