Did you have to use an electronic trigger module to install the HI-6DI2? I'm getting ready to install the ignition, but I don't want to begin until I know I got all the right parts. Also, where did you guys tap for the heavy red batter positive (off the main harness under the steering wheel?)?

Any tips concerning installation will be greatly appreciated.

___________
Kon C

"Sometimes, a man has to do what a man has to do."

You mean the tach adapter right?If so,yes you do.You only need one but I can't remember the right part number.I know Howell has it.

Yes two tach adapters, not sure on part number either.
I tapped directly to the battery for the power and ground. The other connections come off the coil. Center wire is power to the coil, and I don't remember off hand which the others are, but one if cylandes 1-4 and the other 2-3.

Thw wiring is easy, you'll be surprised at how simple the install is. Just please have a manual handy so you get the right wires when you cut the coil connection.

"The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it." - Albert Einstein



Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold 1/2, Rear disc brake conversion kit w/, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

I have the tach adapter p/n listed as 6000-8933. Just tell howell exactly what you have and they should be able to provide the correct part.

Matt

99GS MT | Star Stage 2 | GC coilovers | HurriganeGS tie bars | Tokico Illuminas | 17x7 Enkei RS5 | Baer track brakes |+

Thanks for the response guys. The reason I was confused was because figure 4 in Crane's generic hookup diagram showed an "Electronic Trigger" module. So, we don't need that. Later.

___________
Kon C

"Sometimes, a man has to do what a man has to do."

To be honest,if you use the right tach adapter you should only need one.Howell's verified this on the CRANE,same thing w/ MSD's.

Actually if I remember right our hook up is off of figure 5. 'll check when I get home.

"The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it." - Albert Einstein



Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold 1/2, Rear disc brake conversion kit w/, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Yes figure 5 is the diagram for us. I think figure 4 is for the 4G63.

"The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it." - Albert Einstein



Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold 1/2, Rear disc brake conversion kit w/, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Again, thanks for the help guys, but I'm still a little confused about something; is the "tach adapter" that you guys are referring to, the same thing as the "electronic trigger" unit in the Crane install diagram 5? I know this sounds like a stupid question, but I just don't want to fry anything, or buy anything unnecessarily. Thanks!

___________
Kon C

"Sometimes, a man has to do what a man has to do."

What diagram are you looking at? My figure 5 has two tach adapters part number 8910 off to the left the module at the bottm an dthe coils at the right.

"The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it." - Albert Einstein



Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold 1/2, Rear disc brake conversion kit w/, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Now, I'm really confused. The photo copy instructions I got with the Crane HI-DI2 that I bought from HRC is 12 pages long. I see an OE 1991-95 Eclipse ignition diagram at the bottom of page 3 that shows 2 tach trig 1 & 2. My page 8, figure 5 diagram is a "Generic HI-6DI2 Hookup to Two Dual Tower Coils," and it shows an "Electronic Trigger" to the top of, and left of, the ignition unit. And page 7, figure 4 is a hookup to a "Four Tower Coil Pack."

So, are you saying that you wired it according to the 1991-95 OE diagram? I wonder if we actually have different version instructions. I'll call HRC if I can ever find the time in the afternoon. Thanks man.

___________
Kon C

"Sometimes, a man has to do what a man has to do."

Kon and Michael,

Look at page 8 (figure 5) of the following *.pdf file. I think this is the instructions Kon has.

http://64.90.9.168/cranecams/pdf/90006500c.pdf

Then look at page 8 (figure 5) of these instructions. Which are the ones I think Michael has.

http://64.90.9.168/cranecams/pdf/90006500.pdf

If I am right, then this is the cause of the confusion. We have a four tower coil pack right?



Eric Madden